Order as many floor samples as you like and we'll ship all samples to you for free! You may then return them, within six months, and receive a refund for all returned samples. Please note: We do not reimburse for return shipping costs.
Gulf Synthetics' DeckRevive is a non-toxic, water-based coating that cross-links with exterior paint to form a hard, durable covering that protects any wood substrate. Simply mix it with one-gallon of colored gloss sheen exterior paint to rejuvenate old worn out, dried out, beat up decks, fences, siding, furniture or anything made of wood (NOT for use on composite decking).
NOTE: We recommend ECOS Interior Wall and Ceiling Paint as the mixer. It sounds counterintuitive, but the Gloss Sheen of this interior paint is endorsed for exterior and interior usage.
DeckRevive is a two-part additive, with one part powder and one part liquid. It comes with a five-gallon bucket for easy and convenient mixing. With two coats applied, the coverage will be approximately 200 square feet per kit depending on surface porosity and texture.
PLEASE NOTE: For proper adhesion, PermaBond is REQUIRED as a primer for this product.
NOTE: Permafill (for deep holes and cracks) has been discontinued, Gulf Synthetics recommends Quikrete Quick Setting Filler as a replacement for Permafill.
If you believe in miracles, this product is up for nomination. It's truly a deck and dock saver. It transforms old decks, docks, fences, etc., into like-new beautiful skid-resistant surfaces that will last a very long time. No reapplication or touch-up necessary.
Features & benefits
Easy-to-use – DIY; mix and paint with two coats
Fast-drying – dry to touch in minutes; open to foot traffic in a few hours
Multi-purpose – use on decks, docks, siding, shakes, hand rails and furniture
Long-lasting – resistant to stains, scuffs, skid marks and fire; no or low maintenance required
Helps inhibit rust – stops bleed-through from nails and fasteners
Encapsulates wood – locks down splinters; fills holes
Unlimited color range – just add any color gloss sheen exterior latex or acrylic paint
Alert: Please note it may take several test runs to get just the right color.
Discontinued Sizes: Quarter Kits
State Nexus Fee may apply A state nexus fee will be applied to this item if drop shipped to the following states: . We're sorry for the inconvenience. Click here to read more about the state nexus fee.
Specs
Dimensions
Coverage (1 Coat)
Full Kit - 200 SF (for 2 coats, complete kit)
Coverage2
Recommended # of Coats
2
Re-coat After
as needed
Drying Time
1-2 hours
Square Feet / Box
Square Feet
Thickness or Height
"
Thickness
mm
Veneer Cut Thickness
Length
"
Length
mm
Width
"
Width
mm
Boxes / Pallet
Boxes
Square Feet / Pallet
Square Feet
Boards / Box
Boards
Pieces / Box
Pieces
Weight / Box
Pounds
Basics
Interior or Exterior
Exterior
Use On Material
**Do Not Use on Composite Decking**, Columns, Decking, Decking: Old, Docks, Fences, Shingles, Siding, Wood: All Types
BEFORE YOU BEGIN: All loose/flaking paint needs to be removed. Your surface needs to be cleaned then primed with Gulf Synthetics PermaBond.
PREP: Remove both wet and dry chemistry from container. Empty white liquid resin into container. Add one gallon of exterior latex or acrylic GLOSS paint (any color) NOTE: This will not work with a non-gloss paint. Mix briskly for one minute. Slowly add dry chemistry while stirring briskly with drill mixer for five minutes. Stir mixture-loosen up any dry portion from the bottom of container. Dry chemistry components should break down completely and mix should be smooth and viscous. The coating is now activated and should be used immediately.
Do not alter the chemistry of the product in any way by adding or subtracting material or by adding other ingredients (DO NOT ADD WATER). If you are working on a large area with more than one kit, mix each kit separately and then blend together for color consistency.
APPLICATION: For best coverage, use a 3/8" nap paint roller and roll out the first coat perpendicular-(against) the grain. This allows the coating-work into the cracks and splinters, filling them up and locking them down. Allow-dry completely before applying the second coat.
Apply second coat in the opposite direction or parallel with the grain of the wood. The second coat is key-attaining the proper texture. If a more aggressive non-slip texture is desired, use a one-inch nap roller for the second coat. Be consistent in your technique. Allow-dry.
Additional coats may be applied-build the final mil thickness, if desired. Clean tools with water. keep a lid on any extra product and store in a cool, dark and dry space. activated coatings will have an approximate 14-day pot life. buckets should be cleaned and re-used.
Download "Application Instructions" document for complete instructions.
Surface or Product Preparation
For best results, we recommend the surface to be CLEAN, DRY, DULL, and of MODERATE TEMPERATURE.
CLEAN: Surfaces must be thoroughly clean, free of dirt, sealer or waxes, peeling paint, mildew, tar, mill glaze, efflorescence, grease or oily substances. Clean the surface by power washing, and allow substrate to dry completely for a minimum of 48 hours. Do not use a Deck cleaning product because many contain solvents. (DO NOT use a detergent with a de-greaser)
DRY: The surface needs to be thoroughly dry. Test wood using a probe type moisture meter. No more than a 20% moisture content is recommended. For exterior projects, do not apply if precipitation is predicted in the next 24 hours.
DULL: Glossy, painted, or sealed surfaces must be dulled by sanding, to produce a profile for the DeckRevive™ coating to bond to. After sanding, clean surface of any loose debris.
MODERATE TEMPERATURE: For best results apply between 40˚- 85°F. Do not apply if ambient temperature or the surface temperature is <40˚ or >85˚F. If temperature is less than 40˚F this product will cure too slowly or maybe not at all. If temperatures exceed 85˚F, this coating may set too quickly. Additionally, do not apply coating if temperature is predicted to drop below 40˚F within the next 24 hours.
PREPPING CRACKS AND NAIL/SCREW HEADS: DeckRevive™ is quite thick and will easily fill most small cracks. If existing cracks are excessive (over 3/8” deep and wide) use Quikrete Quick Setting Filler to infill before coating with DeckRevive™. For best results, countersink rusting nail or screw heads and apply Quikrete Quick Setting Filler to infill. Do not smear Quikrete Quick Setting Filler on adjacent wood surface. Allow Quikrete Quick Setting Filler to dry 2-hours before applying DeckRevive™. If you desire, rusty nails can be spot primed with a rust inhibitive primer found at your local paint store. See manufacturers recommended rust inhibitive primer specification sheet.
PRIMER REQUIRED: PermaBond Primer is required over pre-painted, pre-stained, redwood, cedar and extremely cracked or weathered deck boards when applying DeckRevive. PermaBond can be colored by adding 1 quart of exterior latex paint to a gallon of PermaBond.
Appearance When Dry
depends on type and color of paint
Cleans Up With
Water
Storage
Store in cool dry place out of sunlight
Recycling or Disposal
Dispose of excess product in accordance with all local state and federal regulations, Do not throw out container unless completely empty. Pour contents onto dry cardboard and let thoroughly dry outdoors. May also be absorbed with cat litter sand or other dry materials
Adhesive
Bamboo Construction
Bathroom Installation
Color Change
Construction
Construction Description
Durability
Edge
Finish
Finish Sheen
Finish Contains Aluminum Oxide?
Floor Item Type
Floor Pattern
Floor Type
Grade Installation
Grading
Installation
Janka Hardness Rating
Joint System
Knots
Material
Number of Plys
-Plys
Composition
Radiant Heat
Range of Resistance
Risk in Dry Climates
Style
Shade (1 Light) - (7 Dark)
Strips / Plank
-Strips/Plank
Surface Texture
Surface Treatment
Surface Treatment Color
Tile Application
Touch Up Kit
Can be indoor?
Can be outdoor?
Direct Vent?
Easy-Linkable?
Energy Factor
Max Gallons Per Minute
- GPM
Max BTU's / Hour
- BTU's / Hour
Multi Control Capabilities
Temperature Range (with remote)
Life
Hrs
Input Wattage
W
Delivered Lumens
lm
Efficacy
lm/W
Color Temperature
K
Color Rendering Index (CRI)
Equivalent Wattage
W
Energy Savings
Additional Information
Shipping Info
Questions & Answers
Reviews
Green Building Supplies:
Coverage Estimator
Area of room (sq ft):.
it=A&id=25178&fromsla=T
[Error processing dynamic tag include('/stavano.ssp') : include not permitted in this context]