Order as many floor samples as you like and we'll ship all samples to you for free! You may then return them, within six months, and receive a refund for all returned samples. Please note: We do not reimburse for return shipping costs.
Gorilla PVC Cement PrimaGlue is a self-priming PVC pipe glue that requires no additional primer thus saving time, money and labor, all without exposure to nasty solvents. Unlike other PVC glues, Gorilla PVC Cement PrimaGlue is virtually odorless and cleans up easily with water rather than acetone.
These qualities and more make Gorilla PVC Cement PermaGlue perfect for under-the-sink jobs and home remodels. It can be used on Schedule 40 PVC and class 200 PVC up to 6", as well as on Sch 80 up to 3". This glue is also approved for potable water, DVW, sewer, drain, pressure systems up to 160PSI and 185 °F, and electrical conduit.
NOTE: this product is not approved for ABS or CPVC installations. Gorilla PVC will not bond to other surfaces such as iron or stainless steel.
It's non-toxic and virtually odorless! By comparison to most other PVC adhesives, the VOC content of Gorilla PVC Cement is low.
Ask any plumber about PVC glue and he or she will tell you it's one of the worst adhesives in terms of its effects on health. Gorilla PVC Cement outperforms regular PVC glue, meets all the plumbing standards, requires no priming AND does not kill your sinuses in the process. It also has a longer setup time and longer shelf life than conventional PVC glue — plus it won't stain your clothes.
Features & benefits
Tougher than the pipe itself — meets or exceeds ASTM and IAPMO R&T standards for strength, leakage under pressure, and tightness of bonded joints
One-step, self-priming — saves time, money and labor
Easy-to-use — water-soluble for quick cleanup
Preserves indoor air quality — non-fuming; ultra low-odor
The solvent NMP used in Gorilla PVC Cement is neither explosive nor spontaneously flammable in air. Its flash point is over 200 °F. This means it has to be heated to 200 °F before it gives off enough vapors to explode. However, it is combustible. When ignited, NMP will sustain a fire. Therefore, do not smoke when using Gorilla PVC Glue, and don't use it around sparks.
Please note that the manufacturer states on its label: "Warning, this product contains NMP (N-methyl-2-pyrrolidone, NMP), a chemical known to the State of California to cause birth defects or other reproductive harm". There has been a study in California which applied NMP at 100% strength on pregnant rodents for a month, with frequent re-applications to make sure it was still on their skin. The test resulted in smaller size babies. There have been no tests on humans. Although the warning for NMP is required only by the State of California, the manufacturer has chosen to include the warning on product sold in all 50 states. Please note this product is not presented as "non-toxic", although it is "Low VOC, Eco-Friendly and Cleans up with water." It's the only alternative we've found to the nasty PVC glues on the market. But please wear gloves.
State Nexus Fee may apply A state nexus fee will be applied to this item if drop shipped to the following states: . We're sorry for the inconvenience. Click here to read more about the state nexus fee.
Coverage (1 Coat)
Recommended # of Coats
see set and cure schedule in right hand margin. Depends on pipe size and ambient temperature
Square Feet / Box
Thickness or Height
Veneer Cut Thickness
Boxes / Pallet
Square Feet / Pallet
Boards / Box
Pieces / Box
Weight / Box
Interior or Exterior
Use On Material
**Do Not Use on ABS Plastic**, **Do Not Use on CPVC Plastic**, PVC
Bonds PVC-PVC for schedule 80 through 3" dia. and all other classes and schedules through 6" dia. Approved for potable water, DWV sewer, drain, pressure systems-160 psi, gas, electric, conduit, and hot water-185 F. Non-flammable but do not expose-open flame. Flash point 204F. Non-combustible per DOT or OSHA specs.
Yes, BUT return to room temperature BEFORE opening can
Residential Finish Wear
Commercial Finish Wear
Forest Stewardship Council (FSC)
FSC Chain-of-Custody #
LEED® Regional Materials Zip Code
Meets or exceeds American Society for Testing and Materials (ASTM) D2564-02 requirements for use as a cement, Meets or exceeds American Society for Testing and Materials (ASTM) F656-02 requirements for use as a primer, UL classified for fire hazard
Country of Manufacture
Use With These Prodcuts
Number of Colors
Critical Radiant Flux
Face or Pile Weight
Pile Height (High)
Pile Height (Low)
Resistance to Insect Pests
Stitches Per Inch
Surface Texture, Construction, Style
Tufts per Sq. In.
Tufts / Sq In
Bundles per Pallet
Bundles per Square 6" Exposure
Bundles per Square 7" Exposure
Bundles per Square 7-1/2" Exposure
Bundles per Square 8" Exposure
Pounds per Bundle
Pounds per Pallet
Pounds per Roll
Pounds per Square
Pounds per Square 6" Exposure
Pounds per Square 7" Exposure
Pounds per Square 7-1/2" Exposure
Pounds per Square 8" Exposure
Lin Feet per Bundle
Lin Feet per Pallet
Rolls per Pallet
Squares per Roll
Tiles per bundle
Tiles per Lin Foot
download Material Safety Data Sheet (MSDS)
Application Temperature Range
Cut PVC pipe-length so that ends are square. Remove any burrs. Wipe pipe and fitting with a dry paper towel or cloth. Pipe and fittings must be clean and dry for a proper bond. Check for proper fit prior-applying cement. Pipe should slip snugly, one third-two thirds of the way into fitting. If it doesn't, sand as needed.
Use applicator (i.e., dauber in cap)-spread an even coating of cement around outside of pipe-a depth equal-depth of fitting. Coat inside of fitting. Keep the pvc cement 3/16" from the end of the pipe in order-minimize the possibility of some of the cement (1) flowing into the interior of the female end during the next step, and (2) a bead of cement forming on the outside edge of the joint. Either of these situations could cause problems due-the solvent not evaporating right away and thus continuing-weaken the pipe as it solvent welds the two pieces together.
Push pipe and fittings together while cement is wet. Twist and rotate pipe all the way into fitting. This spreads cement evenly around joint. Work quickly. Adjust orientation for proper alignment before cement hardens. Hold in place for about 1 minute (to prevent male end from backing out). Do not adjust after cement "grabs". Remove any excess cement with a clean, dry paper towel.
Allow 3 min. for proper handling strength and 30 min. cure time before pressure testing (to 160 psi). High humidity, cold weather and/or pipe above 2" dia. require longer cure time (in fact, we highly recommend that you wait 24 hours before pressure testing in these cases). Full strength in 24 hours. Run water through finished assembly-flush out excess and neutralize any cement inside pipe. Clean Gorilla PVC from hands with water while still wet.
Do not use if jelled. Do not thin! Avoid contact with skin.
Surface or Product Preparation
Surface should be clean, dry, free of oil, wax and solvents
Appearance When Dry
Cleans Up With
Store in cool dry place out of sunlight
Recycling or Disposal
Dispose of excess product in accordance with all local state and federal regulations, Do not throw out container unless completely empty. Pour contents onto dry cardboard and let thoroughly dry outdoors. May also be absorbed with cat litter sand or other dry materials
Finish Contains Aluminum Oxide?
Floor Item Type
Janka Hardness Rating
Number of Plys
Range of Resistance
Risk in Dry Climates
Shade (1 Light) - (7 Dark)
Strips / Plank
Surface Treatment Color
Touch Up Kit
Can be indoor?
Can be outdoor?
Max Gallons Per Minute
Max BTU's / Hour
- BTU's / Hour
Multi Control Capabilities
Temperature Range (with remote)
Color Rendering Index (CRI)
Questions & Answers
Green Building Supplies:
Area of room (sq ft):.
[Error processing dynamic tag include('/stavano.ssp') : include not permitted in this context]