Order as many floor samples as you like and we'll ship all samples to you for free! You may then return them, within six months, and receive a refund for all returned samples. Please note: We do not reimburse for return shipping costs.
Forbo Sustain 885 M (formerly L885) Sheet and Tile Adhesive is a water-based mastic specially formulated for all Marmoleum sheet and tile flooring. This is a new all-in-one formulation that replaces the old L910 and T940.
This adhesive naturally resists moisture and mildew and, with better initial grab and longer open time. Requires 1/16 x 1/16 x 1/16 square notched trowel and covers 125 square feet per gallon.
Unlike solvent-based adhesives, Forbo Sustain 885 M has zero VOC emissions and exceeds CARB2 standards as well as most other European Standards. Once dried it has virtually no odor and will not off-gas.
NOTE: This adhesive is required for the Marmoleum sheet and tile warranty and must be rolled with a 100 pound roller.
NOTE: Sustain 885 M has a very specific ranges of installation conditions: temperature and humidity should range from 75º F ± 10º F (23.9º C ± 5.5º C) with a 50% ± 10% ambient relative humidity. These conditions must be established at least seven days prior to beginning the installation, maintained during the installation, and continued for at least seven days following the installation. In the case of RV, or a tiny home on wheels, or similar installation, you must have your work area within a climate controlled situation to maintain these parameters, like an enclosed garage, for the entire prep, installation, and post installation process as outlined above.
Non-toxic — solvent-free; zero VOC emissions, no formaldehyde or hazardous ingredients
State Nexus Fee may apply A state nexus fee will be applied to this item if drop shipped to the following states: . We're sorry for the inconvenience. Click here to read more about the state nexus fee.
Residential Finish Wear
Commercial Finish Wear
Forest Stewardship Council (FSC)
FSC Chain-of-Custody #
Indoor Environmental Quality/4.1 Low-Emitting Materials/Adhesives and Sealants: 1 point
LEED® Regional Materials Zip Code
Meets or exceeds California Air Resources Board (CARB) 2 requirements
100 lb roller, trowel - 1/16" x 1/16" x 1/16" square notched
Application Temperature Range
Warmer than 55°F
Surface or Product Preperation
Surface should be clean, dry, free of oil, wax or solvents--see manufacturers instructions
Recommended # of Coats
Appearance When Dry
Cleans Up With
Store in cool dry place out of sunlight
Recycling or Disposal
Dispose of excess product in accordance with all local state and federal regulations, Do not throw out container unless completely empty. Pour contents onto dry cardboard and let thoroughly dry outdoors. May also be absorbed with cat litter sand or other dry materials
Finish Contains Aluminum Oxide?
Floor Item Type
Janka Hardness Rating
Number of Plys
Range of Resistance
Risk in Dry Climates
Shade (1 Light) - (7 Dark)
Strips / Plank
Surface Treatment Color
Touch Up Kit
Can be indoor?
Can be outdoor?
Max Gallons Per Minute
Max BTU's / Hour
- BTU's / Hour
Multi Control Capabilities
Temperature Range (with remote)
Color Rendering Index (CRI)
Questions & Answers
Green Building Supplies:
Area of room (sq ft):.
[Error processing dynamic tag include('/stavano.ssp') : include not permitted in this context]