Order as many floor samples as you like and we'll ship all samples to you for free! You may then return them, within six months, and receive a refund for all returned samples. Please note: We do not reimburse for return shipping costs.
PermaBond is an acrylic-based two-part polymer, especially formulated to penetrate and lock into wood fibers, providing a strong molecular bond for DeckRevive. PermaBond offers that extra bit of insurance against some of the unknowns that distressed wood may have been exposed to. Priming with PermaBond ensures excellent adhesion to very weathered boards.
Permabond is non-toxic and zero VOC. It dries quickly and can be mixed with any color by adding 1 quart of 100% water-based acrylic exterior gloss paint. Pot life is 14-21 days after components are blended. Shelf life is 2 years unopened if stored in cool dry area. Do not allow to freeze. Coverage is 300-400 sq. ft. depending upon porosity of the substrate.
NOTE: This is now REQUIRED by the manufacturer for each DeckRevive application over new OR old wood.
NOTE2: Pressure treated wood must be seasoned for one year before application of PermaBond. That means the wood must sit out in the weather unprotected for one year before using PermaBond.
DeckRevive is a fantastic product, but if your deck is badly weathered and falling apart, and you don't have the time or money to sand it down to bare wood, this is the best way to insure they will bond well. You still have to clean off dirt, mold and mildew, but PermaBond is extremely aggressive, and it bonds to almost anything porous.
Features & benefits
Enhances adhesion — use on any wood to improve bonding
Fast-drying — dry to touch in minutes; open to foot traffic in a few hours
Multi-purpose — use on decks, docks, siding, shakes, hand rails and furniture
Encapsulates wood — locks down splinters; fills holes
Unlimited color range — just add any color latex or acrylic paint
State Nexus Fee may apply A state nexus fee will be applied to this item if drop shipped to the following states: . We're sorry for the inconvenience. Click here to read more about the state nexus fee.
Coverage (1 Coat)
1-Gallon = 300-400 SF
Recommended # of Coats
3-4 hours depending upon humidity and temperature
Square Feet / Box
Thickness or Height
Veneer Cut Thickness
Boxes / Pallet
Square Feet / Pallet
Boards / Box
Pieces / Box
Weight / Box
Interior or Exterior
Use On Material
Clean, dry new or old wood that is free of mold, mildew, oil, wax or rotten wood. Ideally pressure washed or sanded.
Substrate preparation: For best results, we recommend the surface to be CLEAN, DRY, DULL, and of MODERATE TEMPERATURE.
New wood or concrete: Remove any dirt, grease, glue or other contaminants. Moisture content of wood should be no more than 20%. Sand to 150-180 grit. Proper sanding of wood is absolutely critical to achieve the best adhesion of the coating to the substrate.
Old wood or concrete: Clean the surface by power washing, and allow substrate to dry completely for a minimum of 48 hours. DO NOT use a Deck cleaning product because many contain solvents. DO NOT use a detergent with a de-greaser. Acid etching of Concrete is not required
Mixing Instructions: If desired, add one quart of any 100% acrylic exterior gloss latex paint and mix briskly with a drill and paint mixer for one minute.
Application: Apply one coat to wood or concrete by cutting in edges with a nylon/polyester paint brush. Apply one coat to wood or concrete surface using a 3/8” nap nylon/polyester roller. DO NOT allow PermaBond to cure for extended periods of time before applying subsequent topcoats. As soon as it is dry, immediately apply initial coat of DeckRevive, DockRevive or ConcreteRevive.
Clean up: Clean tools with warm, soapy water.
Download "Application Instructions" document for complete instructions.
Surface or Product Preparation
Appearance When Dry
Cleans Up With
Soap & Water
Store in cool dry place out of sunlight
Recycling or Disposal
Finish Contains Aluminum Oxide?
Floor Item Type
Janka Hardness Rating
Number of Plys
Range of Resistance
Risk in Dry Climates
Shade (1 Light) - (7 Dark)
Strips / Plank
Surface Treatment Color
Touch Up Kit
Can be indoor?
Can be outdoor?
Max Gallons Per Minute
Max BTU's / Hour
- BTU's / Hour
Multi Control Capabilities
Temperature Range (with remote)
Color Rendering Index (CRI)
Questions & Answers
Green Building Supplies:
Area of room (sq ft):.
[Error processing dynamic tag include('/stavano.ssp') : include not permitted in this context]