Order as many floor samples as you like and we'll ship all samples to you for free! You may then return them, within six months, and receive a refund for all returned samples. Please note: We do not reimburse for return shipping costs.
Bioshield Aqua Resin Floor Finish, Colored is a semi-transparent polyurethane stain finish for most types of indoor flooring. As an abrasion-resistant finish, this product is suited for high traffic areas such as hallways. Unlike solvent-based floor finishes, Bioshield Aqua Resin Floor Finish, Colored is non-toxic, water-based and odor-free once it dries.
BioShield Aqua Resin Floor Finish, Colored is well-suited for doors, molding, work surfaces, tables, stairs and other furniture. It is also available as Aqua Resin Floor Finish, Clear.
NOTE: Don't confuse these with a product of similar name called Bioshield Aqua Resin Stain Finish which has no polyurethane protection. The advantage of using Bioshield Aqua Resin Stain Finish is that a precise stain color may be easier to achieve. Once that's done, the Bioshield Aqua Resin Floor Finish, Clear may be applied over the top without changing the color underneath.
The advantage of using Aqua Resin Floor Finish, Colored instead of the stain is that the job can be completed with one product. The disadvantage is that the color cannot be tweaked easily except by adding more finish; this is a slower process than with the stain because each additional coat darkens only slightly.
Alert: Do not shake or use roller, and apply only in thin coats.
State Nexus Fee may apply A state nexus fee will be applied to this item if drop shipped to the following states: . We're sorry for the inconvenience. Click here to read more about the state nexus fee.
Apply BioShield Aqua Resin Floor Finish at a room temperature above 59 degrees F (15 C). Stir product well before use. (Extreme agitation such as heavy shaking or mixing by machine may cause surface bubbles and should be avoided.) Apply one priming coat by brush. Allow-dry. Light sanding between coats (220-320 Grit) is recommended for best results. After the first priming coat apply one additional thin and even coats color coat, and a third coat either clear or color depending on desired color density. Allow-dry between each coat, and optional sanding.
Surface or Product Preperation
Surface should be clean, dry, free of grease and absorbent. Before applying the first coat, all surfaces should be sanded no finer than 120 Grit. Exotic wood should be degreased prior to application of BioShield Aqua Resin Floor Finish
Recommended # of Coats
dries in 4-5 hours and cures over one week.
Appearance When Dry
satin plus color
Cleans Up With
Store in cool dry place out of sunlight
Recycling or Disposal
Dispose of excess product in accordance with all local state and federal regulations, Do not throw out container unless completely empty. Pour contents onto dry cardboard and let thoroughly dry outdoors. May also be absorbed with cat litter sand or other dry materials
Finish Contains Aluminum Oxide?
Floor Item Type
Janka Hardness Rating
Number of Plys
Range of Resistance
Risk in Dry Climates
Shade (1 Light) - (7 Dark)
Strips / Plank
Surface Treatment Color
Touch Up Kit
Can be indoor?
Can be outdoor?
Max Gallons Per Minute
Max BTU's / Hour
- BTU's / Hour
Multi Control Capabilities
Temperature Range (with remote)
Color Rendering Index (CRI)
Questions & Answers
Green Building Supplies:
Area of room (sq ft):.
[Error processing dynamic tag include('/stavano.ssp') : include not permitted in this context]