Order as many floor samples as you like and we'll ship all samples to you for free! You may then return them, within six months, and receive a refund for all returned samples. Please note: We do not reimburse for return shipping costs.
This product may not perform properly if applied below the required temperature. Please check installation instructions on our website.
Because this is a water-based product, it may freeze during shipping. For that reason we will not ship over a weekend if temperatures dip below 32 degrees F. If you want us to ship anyway, it will be at your own risk. Please call to arrange with a GBS eco-advisor. 800-405-0222
Bioshield Aqua Resin Floor Finish, Clear is a polyurethane topical sealer for most types of indoor flooring. As an abrasion-resistant finish, it's suited for high traffic areas including hallways. Unlike solvent-based floor finishes, Bioshield Aqua Resin Floor Finish, Clear is non-toxic, water-based and odor-free once it dries.
It provides a satin sheen and is well suited for doors, molding, work surfaces, tables, stairs and furniture.
NOTE: Don't confuse these with another product of similar name called Bioshield Aqua Resin Stain Finish which has no polyurethane protection. However, Aqua Resin Floor Finish, Clear may be used over the top of Aqua Resin Stain Finish.
NOTE2: These are special order items from Bioshield and are not returnable.
State Nexus Fee may apply A state nexus fee will be applied to this item if drop shipped to the following states: . We're sorry for the inconvenience. Click here to read more about the state nexus fee.
Coverage (1 Coat)
4.25-Ounce = 17-19 SF .75-Liter = 98-112 SF 33.8-Ounce = 140-160 SF 84.44-Ounce = 350-400 SF 5-Liter = 700-800 SF 10-Liter = 1,400-1,600 SF
Apply BioShield Aqua Resin Floor Finish at a room temperature above 59 degrees F (15 C). Stir product well before use. (Extreme agitation such as heavy shaking or mixing by machine may cause surface bubbles and should be avoided.) Apply one priming coat by brush or short nap roller. Allow-dry. Light sanding between coats (220-320 Grit) is recommended for best results. After the first priming coat apply one additional thin and even coats color coat, and a third coat either clear or color depending on desired color density. Allow-dry between each coat, and optional sanding.
Surface or Product Preparation
Surface should be clean, dry, free of grease and absorbent. Before applying the first coat, all surfaces should be sanded no finer than 120 Grit. Exotic wood should be degreased prior to application of BioShield Aqua Resin Floor Finish
Recommended # of Coats
dries in 4-5 hours--cures in one week
Appearance When Dry
Cleans Up With
Store in cool dry place out of sunlight
Recycling or Disposal
Dispose of excess product in accordance with all local state and federal regulations, Do not throw out container unless completely empty. Pour contents onto dry cardboard and let thoroughly dry outdoors. May also be absorbed with cat litter sand or other dry materials
Finish Contains Aluminum Oxide?
Floor Item Type
Janka Hardness Rating
Number of Plys
Range of Resistance
Risk in Dry Climates
Shade (1 Light) - (7 Dark)
Strips / Plank
Surface Treatment Color
Touch Up Kit
Can be indoor?
Can be outdoor?
Max Gallons Per Minute
Max BTU's / Hour
- BTU's / Hour
Multi Control Capabilities
Temperature Range (with remote)
Color Rendering Index (CRI)
Questions & Answers
Green Building Supplies:
Area of room (sq ft):.
[Error processing dynamic tag include('/stavano.ssp') : include not permitted in this context]