Order as many floor samples as you like and we'll ship all samples to you for free! You may then return them, within six months, and receive a refund for all returned samples. Please note: We do not reimburse for return shipping costs.
Tough exterior-grade, non-toxic polyurethane for wood or concrete surfaces
Cold Weather Alert:
This product may not perform properly if applied below the required temperature. Please check installation instructions on our website.
Because this is a water-based product, it may freeze during shipping. For that reason we will not ship over a weekend if temperatures dip below 32 degrees F. If you want us to ship anyway, it will be at your own risk. Please call to arrange with a GBS eco-advisor. 800-405-0222
AFM Safecoat EXT is an ultra-low VOC, crystal clear topical sealer that creates a durable, long-lasting finish on most wood and concrete surfaces. It also seals in off-gassing of hazardous chemicals. It's non-toxic and safe for everyone, even those with chemical sensitivities. Unlike oil-based polyurethanes which off-gas for weeks, this product has no odor once dried.
AFM Safecoat EXT is a high solids, high build sealer comparable to conventional urethanes in performance, with exceptional durability and abrasion resistance—but without the harmful ingredients.
Use two coats on unfinished or stained wood, concrete or previously painted surfaces. If a satin finish is desired, one base coat of gloss is required. This product dries fast and completely clear, and it will not yellow. Please read preparation instructions carefully.
NOTE: This product is not to be used over oil-based polyurethanes or oil-based products.
If you're looking for a tough topical finish for outdoors, this is the best in the non-toxic variety we have seen. This is similar to most spar varnishes, but it's much safer. It can withstand abuse from Mother Nature by repelling moisture, freeze/thaw and the sun, as well as human nature, by repelling oil, grease, light chemicals and abrasion. Be sure to follow directions carefully as preparation is very important.
Features & benefits
Durable — tough and highly resistant to moisture, sun, light chemicals and abrasion
Non-toxic — formaldehyde-free and includes no solvents, acetone, ammonia or harmful ingredients
Odorless when dried — very slight odor when wet, and virtually no odor when completely dry within 24 hours or longer if humid conditions
Fights indoor air pollution — seals in off-gassing from VOCs beneath it; will not seal pet odors, smoke or other organic type odors (use AFM Dynoseal for that)
Finish — gloss or satin (SATIN finishes requires a GLOSS coat first)
Dries clear — never yellows like oil-based urethanes
Easy-to-use — brush, roll or spray; water clean up
State Nexus Fee may apply A state nexus fee will be applied to this item if drop shipped to the following states: . We're sorry for the inconvenience. Click here to read more about the state nexus fee.
Indoor Environmental Quality/4.2 Low-Emitting Material/ Paints and Coatings: 1 point
LEED® Regional Materials Zip Code
Country of Manufacture
Use With These Prodcuts
Number of Colors
Critical Radiant Flux
Face or Pile Weight
Pile Height (High)
Pile Height (Low)
Resistance to Insect Pests
Stitches Per Inch
Surface Texture, Construction, Style
Tufts per Sq. In.
Tufts / Sq In
Bundles per Pallet
Bundles per Square 6" Exposure
Bundles per Square 7" Exposure
Bundles per Square 7-1/2" Exposure
Bundles per Square 8" Exposure
Pounds per Bundle
Pounds per Pallet
Pounds per Roll
Pounds per Square
Pounds per Square 6" Exposure
Pounds per Square 7" Exposure
Pounds per Square 7-1/2" Exposure
Pounds per Square 8" Exposure
Lin Feet per Bundle
Lin Feet per Pallet
Rolls per Pallet
Squares per Roll
Tiles per bundle
Tiles per Lin Foot
download Material Safety Data Sheet (MSDS)
Use On Material - Condition
brush, roller, spray
Application Temperature Range
Surface or Product Preperation
Surface should be clean, dry and free of oil and wax
Recommended # of Coats
dries in 30 minutes, ready for use in 12 hours. Drying time will vary with
weather conditions, air circulation and temperature.
Appearance When Dry
hard, clear, gloss or satin
Cleans Up With
Soap & Water
Store in cool dry place out of sunlight
Recycling or Disposal
Dispose of excess product in accordance with all local state and federal regulations, Do not throw out container unless completely empty. Pour contents onto dry cardboard and let thoroughly dry outdoors. May also be absorbed with cat litter sand or other dry materials
Finish Contains Aluminum Oxide?
Floor Item Type
Janka Hardness Rating
Number of Plys
Range of Resistance
Risk in Dry Climates
Shade (1 Light) - (7 Dark)
Strips / Plank
Surface Treatment Color
Touch Up Kit
Can be indoor?
Can be outdoor?
Max Gallons Per Minute
Max BTU's / Hour
- BTU's / Hour
Multi Control Capabilities
Temperature Range (with remote)
Color Rendering Index (CRI)
Questions & Answers
Green Building Supplies:
Area of room (sq ft):.
[Error processing dynamic tag include('/stavano.ssp') : include not permitted in this context]