Need Help? Ask Our Eco Advisors
1-Quart-
1-Gallon
AFM SafeCoat, Safe Seal
AFM SafeCoat, Safe Seal
Item #1070
Model #31204
$29.70
Shipping calculated at checkout.
Sealer for toxic off-gassing of porous surfaces
Safe Seal is particularly effective at sealing in formaldehyde and other VOCs from composite wood such as plywood, particleboard, and pressed wood. Safe Seal will not block emissions of organic odors like smoke or pet smells. It's a water-based, low-gloss sealer for highly porous surfaces - mainly on surfaces that are behind the scenes, i.e. not seen or touched, as it can remain slightly tacky after drying. If the MDF or pressed wood has a veneer/skin of melamine or any non-porous surface, Safe Seal should not be applied to that surface. It should be applied only to the exposed edges where raw MDF or particleboard/pressed wood is visible.
NOTE: Safe Seal is not a finish sealer - for furniture and other touchable surfaces refer to AFM Hard Seal, or AFM Acrylacq, for flooring AFM Polyureseal BP. Safe Seal does NOT create a hard finish but is slightly rubbery.
Safe Seal was AFM Safecoat's flagship product that started the company in the mid '70s. It is one of their best selling products because it works quickly to reduce VOC emissions. Two coats are recommended. This product can be sprayed with a garden type pump sprayer, brush, or roller.
If you have questions or doubts, please call us at 1-800-405-0222
NOTE: This product is not to be used over oil-based polyurethanes or oil-based products.
Why We Like It
It's the best and least expensive defense against toxic off-gassing. Works immediately!
Features & benefits
- Improves indoor air quality — Blocks VOC emissions in porous surfaces only
- Improves adhesion and bonding power — strengthens adhesives and coatings applied to treated surfaces
- Low-odor — completely odorless once cured
- Non-toxic, eco-friendly — water-based, low-gloss penetrating sealer, contains no formaldehyde
- Safe — for everyone, including the chemically sensitive; learn how to test a non-toxic product for tolerance
NOTE: May require two coats depending upon off-gassing and one's sensitivity
Specs for 
1-Quart
Dimensions
Weight per Sale Unit
2.35 lbs
8.6 lbs
46 lbs
Coverage
88 SF
Recommended # of Coats
1-3
Re-coat After
4 hours
Basics
Interior or Exterior
Interior,
Use On
Concrete
Mdf
Medex
Plaster
Sheetrock
Surfaces: porous
Wood: chipboard
Wood: oriented strand board (osb)
Wood: plywood
Mdf
Medex
Plaster
Sheetrock
Surfaces: porous
Wood: chipboard
Wood: oriented strand board (osb)
Wood: plywood
Surface or Product Preparation
Surface should be clean, dry and free of oil and wax
Application Method
Brush
Roller
Spray
Roller
Spray
Application Temperature Range
Warmer than 55°F
Location
All Rooms,
Eco-replacement for
Sealers,
Storage
Store in cool dry place out of sunlight
Chemically-sensitive safe
Test before use
Yes, test on inconspicuous area
Certifications
Certifications
- Meets or exceeds California Air Resources Board (CARB) requirements
- SCS Gold
Features
Material Origin
United States,
Country of Manufacture
United States,
Recycling or Disposal
Dispose of excess product in accordance with all local state and federal regulations. Do not throw out container unless completely empty. Pour contents onto dry cardboard and let thoroughly dry outdoors. May also be absorbed with cat litter sand or other dry materials
Cleans Up With
Neutral Cleaners
Base
Water-based
Paint Finish Type
- Sealer
VOC Content
12.0 grams/liter
Drying Time
Dries in 1 hour
Freeze/thaw Safe
No
Appearance When Dry
Slightly milky
Formaldehyde Emissions
No added urea formaldehyde
Finish
Sealer,
Questions & Answers