Order as many floor samples as you like and we'll ship all samples to you for free! You may then return them, within six months, and receive a refund for all returned samples. Please note: We do not reimburse for return shipping costs.
This product may not perform properly if applied below the required temperature. Please check installation instructions on our website.
Because this is a water-based product, it may freeze during shipping. For that reason we will not ship over a weekend if temperatures dip below 32 degrees F. If you want us to ship anyway, it will be at your own risk. Please call to arrange with a GBS eco-advisor. 800-405-0222
AFM Safecoat Hard Seal is a multi-use, clear gloss sealer specially formulated to provide mar-resistance to both low and high-porosity surfaces. Because it forms a continuous membrane when applied properly, it effectively seals any pollution or toxic chemical off-gassing and improves indoor air quality.
Hard Seal can also be used on painted or stained woodwork or on unfinished wood products. Not for use on particle board or chipboard. Two coats are recommended. It will also bond to most vinyl products. If you want a more abrasion resistant sealer, try our AFM Polyureseal BP.
Hard Seal is very low-odor and safe, even for the chemically sensitive. It's easy to apply with a brush or garden pump sprayer.
NOTE: This product is not to be used over oil-based polyurethanes or oil-based products.
NOTE: This product is not to be used over Particle Board or Chipboard.
NOTE: Hard Seal is not recommended for hardwood floors. AFM Polyureseal BP is a more durable product for that particular job.
This is an excellent product for sealing in toxic fumes. One coat usually does it, but two will certainly take care of all odors. It dries quickly and will protect your home's finishes from abuse.
Features & benefits
Easy-to-apply – use a brush or spray it on
Highly-effective – improves indoor air quality; stops air pollution by 96.8%
Durable – very hard; protects finishes from abuse
Beautiful – clear gloss appearance
Low-odor – pleasant to use
Non-toxic – contains no formaldehyde, fungicides or mildewcides
Alert: This product works well on most vertical surfaces or surfaces that don't have much abrasion. Hard Seal is also not recommended for hardwood floors because Polyureseal BP is a more durable product. Hardseal is more flexible so it can be used over resilient type floors like vinyl.
State Nexus Fee may apply A state nexus fee will be applied to this item if drop shipped to the following states: . We're sorry for the inconvenience. Click here to read more about the state nexus fee.
Specs
Dimensions
Coverage (1 Coat)
1-Quart = 88 SF 1-Gallon = 350 SF
Coverage2
Recommended # of Coats
Re-coat After
Drying Time
dries in 1 hour and cures in 24 hours
Square Feet / Box
Square Feet
Thickness or Height
"
Thickness
mm
Veneer Cut Thickness
Length
"
Length
mm
Width
"
Width
mm
Boxes / Pallet
Boxes
Square Feet / Pallet
Square Feet
Boards / Box
Boards
Pieces / Box
Pieces
Weight / Box
Pounds
Basics
Interior or Exterior
Interior
Use On Material
**Do Not Use on Oil-based polyurethanes or Oil-based products.**, **Do Not Use on Solvents**, Drywall: Painted, Furniture, Painted Surfaces: Sealed, Painted Surfaces: Unsealed, Painted Surfaces: Water-Based, Porous, Vinyl, Wood, Wood: New, Wood: Painted, Wood: Plywood, Wood: Resanded, Wood: Sealed, Wood: Solid, Wood: Stained
Use On
NOTE: This product is not to be used over oil-based polyurethanes or oil-based products. NOTE: This product is not to be used on Particle Board or Chipboard.
Surface should be clean, dry and free of oil and wax
Appearance When Dry
Cleans Up With
Storage
Store in cool dry place out of sunlight
Recycling or Disposal
Dispose of excess product in accordance with all local state and federal regulations, Do not throw out container unless completely empty. Pour contents onto dry cardboard and let thoroughly dry outdoors. May also be absorbed with cat litter sand or other dry materials
Samples
Shipping