Order as many floor samples as you like and we'll ship all samples to you for free! You may then return them, within six months, and receive a refund for all returned samples. Please note: We do not reimburse for return shipping costs.
*NOTE 1: Paint Samples are in White Untinted color only.
*NOTE 2: Color swatches may appear different on different monitors and browsers. Computer monitors are not all calibrated the same and digital color reproduction varies. It is not possible to guarantee our online colors will look the same on all computers, therefore we do not guarantee that what you see accurately portrays the color of the paint you will receive. Please order a swatch book to be sure of the color you are ordering.
AFM Safecoat Concrete Floor Paint (formerly known as Deckote) is a highly durable, waterborne semi-gloss floor coating, ideal for concrete floors or walls as well as stucco, brick, block, stone, magnesite or primed metal.
NOTE: Not for use in garages or driveways due to hot tire pickup. Also, this product will not bond to floors made of gypcrete which is a lightweight concrete used in apartment floors.
Two coats are recommended for optimal performance. The second coat must be applied within a few days. Any longer will allow the product to completely cure and require light sanding before the second application.
Safecoat Concrete Floor Paint can be tinted to any AFM color.
It's very easy to apply and seal a floor with AFM Safecoat Concrete Floor Paint. Once you test colors and approve your final choice, AFM Concrete Floor Paint will produce reliable colors for uniform results over the entire application — unlike concrete stains which tend to be blotchy and vary in color.
Features & benefits
Easy-to-use — applies with a roller; easy water cleanup
Tough, hard coating — provides lasting protection
Versatile and durable — use indoors or outdoors; tinting with light colors is available
Non-toxic — no solvents, offensive fumes, formaldehyde, mildewcides or fungicides; no-odor once dried
Alert: This product is not recommended for use on wood, unprimed metal, vitreous surfaces or areas subject to hydrostatic pressure or standing water.
This product will not bond to floors made of gypcrete which is a lightweight concrete used in apartment floors. Two coats are recommended for optimal performance
To avoid floor being slippery when wet, we recommend the addition of sand or other aggregate.
This product has a semi-gloss sheen. When a second coat is applied within a few days time it will bond properly. However, if you wait more than a week, it will fully cure and applying a second coat will not bond well unless you lightly abrade or sand the surface.
State Nexus Fee may apply A state nexus fee will be applied to this item if drop shipped to the following states: California, Wisconsin. We're sorry for the inconvenience. Click here to read more about the state nexus fee.
Surface should be clean, dry and free of oil and wax
Recommended # of Coats
dries in 4-12 hours, walkable in 24 hours
Appearance When Dry
Cleans Up With
Store in cool dry place out of sunlight
Recycling or Disposal
Dispose of excess product in accordance with all local state and federal regulations, Do not throw out container unless completely empty. Pour contents onto dry cardboard and let thoroughly dry outdoors. May also be absorbed with cat litter sand or other dry materials