Order as many floor samples as you like and we'll ship all samples to you for free! You may then return them, within six months, and receive a refund for all returned samples. Please note: We do not reimburse for return shipping costs.
US Floors Propack Glue Down Kit is specially designed for adhering Cork Parquet tiles. It includes primer, adhesive, roller handle and two rollers; it covers 400 SF. It's a low-emitting contact cement that adheres to California SCAQMD Rule #1168 which is 70 g/l.
Please refer to the instruction guide included with the kit. The Subfloor primer must be used first over a clean, dry substrate of plywood or concrete. After 30-45 minutes it should dry. Then, adhesive can be applied.
Adhesive should be rolled over dried primer. It will dry in 20-30 minutes, and then tile should be set within one hour of drying. Tile must then be rolled with 100 lb roller.
A perfect kit that contains all you need, except the roller, to adhere your Natural Cork flooring.
Features & benefits
Complete installation kit — includes primer, adhesive, rollers and handle, but you'll need to rent or borrow a 100 lb roller
Fast tack-up — Primer dries in 30-40 minutes, adhesive in 20 minutes
Low-odor — complies with California SCAQMD Rule #1168
Eco-friendly — very low VOC 70 g/l <
Easy-to-use — DIY project
State Nexus Fee may apply A state nexus fee will be applied to this item if drop shipped to the following states: Georgia. We're sorry for the inconvenience. Click here to read more about the state nexus fee.
Residential Finish Wear
Commercial Finish Wear
Forest Stewardship Council (FSC)
FSC Chain-of-Custody #
LEED® Regional Materials Zip Code
Interior or Exterior
Use On Material
Clean dry stable subfloor of plywood or portland cement based concrete.
This product will not adhere to gypsum cement. Special primers must be used. Please call 800-405-0222 for more info.
All Rooms: Dry
Traditionally-Harvested or Exotic Hardwood Flooring
400 SF per kit which includes Primer, adhesive, 2 rollers and handle.
Square Feet / Box
Thickness or Height
Veneer Cut Thickness
Boxes / Pallet
Square Feet / Pallet
Boards / Box
Pieces / Box
Weight / Box
Country of Manufacture
Use With These Prodcuts
Number of Colors
Critical Radiant Flux
Face or Pile Weight
Pile Height (High)
Pile Height (Low)
Resistance to Insect Pests
Stitches Per Inch
Surface Texture, Construction, Style
Tufts per Sq. In.
Tufts / Sq In
Bundles per Pallet
Bundles per Square 6" Exposure
Bundles per Square 7" Exposure
Bundles per Square 7-1/2" Exposure
Bundles per Square 8" Exposure
Pounds per Bundle
Pounds per Pallet
Pounds per Roll
Pounds per Square
Pounds per Square 6" Exposure
Pounds per Square 7" Exposure
Pounds per Square 7-1/2" Exposure
Pounds per Square 8" Exposure
Lin Feet per Bundle
Lin Feet per Pallet
Rolls per Pallet
Squares per Roll
Tiles per bundle
Tiles per Lin Foot
Use On Material - Condition
100 lb roller, brush
Application Temperature Range
APPLICATION OF SUBFLOOR PRIMER: Only use of USF Contract supplied water-based Subfloor Primer is approved.
Subfloor Primer must be used regardless of type of subfloor. Pour Subfloor Primer into clean paint tray. Using short-nap
roller provided in the kit, apply thin and even coat of Subfloor Primer. Cover subfloor completely. Coverage is 400 sq. ft.
per gallon. Under normal temperature and humidity conditions Subfloor Primer will dry in 30 to 45 minutes. Subfloor
Primer must be totally dry before application of adhesive.
APPLICATION OF ADHESIVE: Only use of USF Contract supplied water-based contact cement included in Propack kit
is approved. Adhesive is formulated to bond to adhesive-backed cork parquet tile. Pour some adhesive into clean paint
roller tray. Using clean short-nap roller, apply a thin coat of adhesive over approximately 50 square feet at a time.
Coverage is 400 sq. ft. per gallon. A uniform, glossy film indicates sufficient amount of adhesive. Stay off adhesive while
it is drying. Adhesive will dry in 20 to 30 minutes under normal temperature and humidity conditions. Once adhesive is
dry, that section of installation must be completed within one hour. Never lay tiles into wet adhesive. Always test for
proper adhesion prior to proceeding with the installation. If the tiles do not seem to adhere properly over a very porous
substrate, it will be necessary to apply a second coat of adhesive.
Surface or Product Preperation
Recommended # of Coats
Primer will dry in 30-45 minutes.
Adhesive will dry in 20-30 minutes under normal temperature and humidity conditions--lay tile into dry adhesive within one hour.