Order as many floor samples as you like and we'll ship all samples to you for free! You may then return them, within six months, and receive a refund for all returned samples. Please note: We do not reimburse for return shipping costs.
DriTac 7500 Eco-Urethane is a professional grade non-toxic adhesive for most types flooring. It cannot be used on vinyl. It has a high initial tack, contains no water and provides a permanent bond. It provides superior coverage, is freeze-thaw stable, non-slumping, very low in odor and remains elastomeric allowing for normal expansion and contraction in wood flooring.
DriTac 7500 offers one of the best adhesives for wood, bamboo or cork flooring for several reasons: 1) it's safe and doesn't smell, 2) it applies easily and quickly and 3) it cleans up easily too. We haven't found anything that performs as well that's non-toxic.
Features & benefits
Non-toxic -- contains no solvents or VOCs and has almost no odor
Flexible -- elastomeric; will expand and contract without cracking
Won't freeze -- contains no water
Bonds well -- to all flooring; bamboo, cork, exotics, solid and engineered wood
Easy to spread -- applies much easier than normal flooring adhesives
Excellent coverage -- see installation guide (pdf download) right hand margin
Versatile -- premium grade works well above or below grade
Certified -- CRI Green Label Plus third-party certified
State Nexus Fee may apply A state nexus fee will be applied to this item if drop shipped to the following states: Illinois. We're sorry for the inconvenience. Click here to read more about the state nexus fee.
•Preparation - All floors should be flat to within 3/16” in 10 ft. or 1/8” in 6 ft.
• Smooth and Flat - Remove any high spots with a terrazzo grinder or sander and fill any low spots with a good quality cementitious-based patch mix.
• Clean - It is required that all concrete, sheet vinyl, vinyl tile, terrazzo and ceramic tile sub floors be scoured with #3-1/2 open coat (20 grit) sandpaper to remove dirt or any surface contamination such as paint, grease, oil, sealers, waxes and curing compounds. DriTac 7500 adhesive should not be used over these substances. Sweep or vacuum the subfloor before installation.