Order as many floor samples as you like and we'll ship all samples to you for free! You may then return them, within six months, and receive a refund for all returned samples. Please note: We do not reimburse for return shipping costs.
NovaLink FP (formerly known as BARR Flash and Patch) is a non-toxic, moisture-cured, elastomeric caulk/sealant designed specifically to waterproof and repair all types of residential and commercial roofing. Elastomeric means it will stretch and shrink with the seasons. Flash and Patch performs well on chimney seals, asphalt shingles, roof valleys, seams and flashing.
This liquid rubber comes in a black gloss and is able to work in cold conditions as low as 40 °F, as well as in wet conditions; this makes it great for temporary emergency repairs. NovaLink FP will not degrade from exposure to sunlight.
NovaLink FP applies as black and dries to a black gloss.
NovaLink FP (formerly known as BARR Flash and Patch) will last a very long time without cracking or shrinking and it won't smell like solvent or petroleum-based products. When you have serious roofing problems, being able to apply this type of material in cold wet conditions is a big plus.
Features & benefits
Weather-tight elastomeric seal — designed for joints that expand and contract, comes in a gloss black color
Quick-setting — tack-free and rain-ready in 30 minutes
Emergency-friendly — designed to quickly and easily fix gaps and cracks
Versatile — applies vertically and overhead; for interior or exterior use
Non-toxic — solvent-free; no formaldehyde or hazardous substances
Easy-to-use — water cleanup; paintable in 24 hours
State Nexus Fee may apply A state nexus fee will be applied to this item if drop shipped to the following states: Illinois, Michigan. We're sorry for the inconvenience. Click here to read more about the state nexus fee.
Residential Finish Wear
Commercial Finish Wear
Forest Stewardship Council (FSC)
FSC Chain-of-Custody #
Indoor Environmental Quality/4.1 Low-Emitting Materials/Adhesives and Sealants: 1 point
LEED® Regional Materials Zip Code
Meets or exceeds California Air Resources Board (CARB) requirements, Meets or exceeds California Bay Area Air Quality Management District (BAAQMD) requirements, Meets or exceeds California South Coast Air Quality Management District (SCAQMD) requirements, Meets or exceeds Californial Proposition 65 requirements, Meets or exceeds OTC requirements for sealants & caulks, Meets or exceeds USDA requirements for non-food contact
caulk gun, see manufacturers guidelines for each type of surface
Application Temperature Range
Warmer than 40°F
Surface or Product Preperation
Surface should be clean, dry and free from all contamination including: dirt, oils, grease, tar, wax, rust and any other substance that may
inhibit the sealants performance. DO NOT use petroleum solvents such as mineral spirits or xylene to clean your surface before using this product. Instead, remove all dirt, oil, loose paint, frost and other contaminates with alcohol. Horizontal applications will require tooling. Allow treated wood to cure for six months prior to application. Do not use in areas subject to continuous immersion of water or chemicals. Do not use on TPO without Chemlink TPO Primer. In most instances NovaLink FP will not require a primer
However, certain applications or substrates may
require a primer to ensure a long lasting bond and
weatherproof seal. It is the applicators responsibility
to determine the need for a primer. Chem Link
recommends a primer be used for any application
where prolonged immersion is anticipated.
Recommended # of Coats
Skins over in 50 minutes
Appearance When Dry
Cleans Up With
Store in cool dry place out of sunlight
Recycling or Disposal
Dispose of excess product in accordance with all local state and federal regulations, Do not throw out container unless completely empty. Pour contents onto dry cardboard and let thoroughly dry outdoors. May also be absorbed with cat litter sand or other dry materials