Order as many floor samples as you like and we'll ship all samples to you for free! You may then return them, within six months, and receive a refund for all returned samples. Please note: We do not reimburse for return shipping costs.
Non-toxic, zero VOC, solvent-free, extreme moisture limiting sheet and tile adhesive
As Sustain 885 is on backorder at the manufacturer, we offer Sustain 1195 Sheet & Tile Adhesive as a replacement.
Forbo Sustain 1195 Sheet and Tile Adhesive is a water-based mastic for all Marmoleum sheet and tile flooring that is specially formulated for extreme moisture conditions . This dual acrylic polymer formulation is an adhesive and moisture limiter all in one. It can handle moisture emissions of 10 lbs per 1000 square feet and up to 95% relative humidity. FYI, the normal adhesive, Sustain 885 adhesive, handles up to 8 lbs/1000 SF at 85% relative humidity.
This adhesive naturally resists moisture and mildew and, with better initial grab and longer open time. It requires a 1/16" x 1/16" x 1/16" square notched trowel and it covers 125 square feet per gallon.
Unlike solvent-based adhesives, Forbo Sustain 1195 has zero VOC emissions and exceeds CARB2 standards as well as most other European Standards. Once dried it has virtually no odor and will not off-gas.
NOTE: This alternative adhesive must be rolled with a 100 pound roller as per Forbo instructions.
NOTE: Sustain 1195 has a very specific ranges of installation conditions: temperature and humidity should range from 75º F ± 10º F (23.9º C ± 5.5º C) with a 50% ± 10% ambient relative humidity. These conditions must be established at least seven days prior to beginning the installation, maintained during the installation, and continued for at least seven days following the installation. In the case of RV, or a tiny home on wheels, or similar installation, you must have your work area within a climate controlled situation to maintain these parameters, like an enclosed garage, for the entire prep, installation, and post installation process as outlined above.
If you have a damp basement, this is for you. This is a replacement for the old Forbo Moisture Limitor. It's an adhesive but also controls moisture even better than the Moisture Limitor. This is an excellent insurance policy against potentially damp floors caused by leaky basement floors or walls or hydrostatic pressure.
Features & benefits
Versatile — use for all Marmoleum sheet and tile flooring; Real, Walton, Decibel, Corkment, Dual, MCT, etc.
Improved installation — better initial-tack and open-time performance; capatible with porous and non-porous surfaces
Fully warranted — guaranteed when used with Forbo floor coverings applied to substrates with moisture emissions of less than 10lbs per 1000 square feet in 24 hours @ 95% relative humidity
Non-toxic — solvent-free; zero VOC emissions, no formaldehyde or hazardous ingredients, made with 25% post-consumer recycled content
Non-Flammable and anti-microbial — Microsept anti-microbial protection
State Nexus Fee may apply A state nexus fee will be applied to this item if drop shipped to the following states: . We're sorry for the inconvenience. Click here to read more about the state nexus fee.