Order as many floor samples as you like and we'll ship all samples to you for free! You may then return them, within six months, and receive a refund for all returned samples. Please note: We do not reimburse for return shipping costs.
We recommend a sample before you order!
We provide fast, free shipping on samples.
Green Building Supply, Industrial Strength Concrete Cleaner
Item #3547
Green Building Supply, Industrial Strength Concrete Cleaner
GBS Industrial Strength Cleaner removes paint, graffiti, tar, adhesives, resins, acrylic coatings, floor wax and ink – as well as dirt and oils – from a variety of surfaces; its high pH simply dissolves whatever is on the surface. Its primary uses are industrial, commercial and residential on all surfaces including concrete, brick, masonry, stucco, cinder block, vinyl siding, wood, metal and fiberglass.
Industrial Strength Cleaner is designed to be used prior to application of our GBS Penetrating Sealer or Penetrating Gloss Sealer. However, the surface must then be washed three times before sealing because any leftover residue will eat through the sealer and prevent proper application.
This product should be diluted, based on the job to be performed: five-to-one water to cleaner for normal cleaning; one-to-one for heavy cleaning; or straight for encrusted oil, grease, paint or adhesives.
Alert: If you're following with a GBS Sealer, wash the surface at least three times before sealing; any leftover residue will eat through the sealer and prevent proper application.
State Nexus Fee may apply A state nexus fee will be applied to this item if drop shipped to the following states: Florida. We're sorry for the inconvenience. Click here to read more about the state nexus fee.
Spray with garden pump sprayer, roll or brush If you're following with a GBS Sealer, wash the surface at least three times before sealing; any leftover residue will eat through the sealer and prevent proper application.
Surface or Product Preperation
Clean, dry and free from all
contamination including: dirt, oils, grease, tar, wax, rust and any other substance that may
inhibit the sealants performance. Do not use in areas subject to continuous immersion of water or chemicals
Recommended # of Coats
as needed
Re-coat After
as needed
Drying Time
1-4 hours
Appearance When Dry
clear matte
Cleans Up With
Water
Storage
Store in cool dry place out of sunlight
Recycling or Disposal
Dispose of excess product in accordance with all local state and federal regulations, Do not throw out container unless completely empty. Pour contents onto dry cardboard and let thoroughly dry outdoors. May also be absorbed with cat litter sand or other dry materials
Samples
Shipping