Order as many floor samples as you like and we'll ship all samples to you for free! You may then return them, within six months, and receive a refund for all returned samples. Please note: We do not reimburse for return shipping costs.
Protective, penetrating oil sealer for hardwood flooring
Bioshield Hard Oil is a plant-based product made of all natural oils that creates a water-resistant barrier. This is a penetrating sealer and does not produce a coating on the surface like a polyurethane or lacquer finish.
The water resistance can be further enhanced by buffing with a standard floor buffing machine using a white or red pad. Burnishing with 250-350 grit alum oxide sandpaper can also be used on furniture or other millwork to improve moisture resistance.
Hard Oil dries clear to amber and beautifully enhances the look of wood. It is recommended for high-moisture and high-traffic areas such as baths and kitchens, and is suitable for both hardwood and softwood floors (1-2 coats). Read instructions carefully.
Durable, long-lasting – cures very hard inside the wood fiber; becomes highly water resistant
All natural ingredients – made from linseed oil, tung oil, colophonium resin (from pine and other conifers), castor stand oil, isoaliphatics, lead-free dryers (Zircon, Cobalt Octoat) and oximes (anti-skimming agent)
Non-toxic – free of petroleum distillates, mineral spirits and hazardous chemicals
Versatile – use on hardwood or softwood flooring, furniture, molding, doors, window casing and more
State Nexus Fee may apply A state nexus fee will be applied to this item if drop shipped to the following states: . We're sorry for the inconvenience. Click here to read more about the state nexus fee.
Coverage (1 Coat)
3.4-Ounce = 15-30 SF 25-Ounce = 112-225 SF 85-Ounce = 375-750 SF
The oil should be applied in a thin, even coat, and we recommend two-three coats. After the oil has been applied, any excess must be wiped from the surface after approximately 15-20 minutes with a soft, cotton cloth. After allowing the final coat of Bioshield Hard Oil#9-dry for at least 24 hours, we recommend a finishing coat of our Floor Hardwax #32, or Wax Finish #39. Drying times will vary due-application method, surface porosity, and climate.
Surface or Product Preparation
Surface should be dry, absorbent and free from contaminants such as oil, grease, wax, and nicotine. The moisture content for hardwoods should be 12 percent or less and for softwoods it should be 18 percent or less. Very resinous woods such as teak should be cleaned with BioShield Citrus Thinner, and other exotic woods should be wiped with an alcohol thinner (Ethanol). This oil should NOT be thinned.
Appearance When Dry
Cleans Up With
Bioshield Citrus Thinner
Store in cool dry place out of sunlight
Recycling or Disposal
Dispose of excess product in accordance with all local state and federal regulations, Do not throw out container unless completely empty. Pour contents onto dry cardboard and let thoroughly dry outdoors. May also be absorbed with cat litter sand or other dry materials
Finish Contains Aluminum Oxide?
Floor Item Type
Janka Hardness Rating
Number of Plys
Range of Resistance
Risk in Dry Climates
Shade (1 Light) - (7 Dark)
Strips / Plank
Surface Treatment Color
Touch Up Kit
Can be indoor?
Can be outdoor?
Max Gallons Per Minute
Max BTU's / Hour
- BTU's / Hour
Multi Control Capabilities
Temperature Range (with remote)
Color Rendering Index (CRI)
Questions & Answers
Green Building Supplies:
Area of room (sq ft):.
[Error processing dynamic tag include('/stavano.ssp') : include not permitted in this context]