Accent Colors

Bioshield Aqua Resin Stain Finish is a solvent-free water-based, Zero VOC, low-drip, resilient wood stain finish for interior and exterior applications.

Specs: Easy to apply, low drip, low splash.  Excellent weathering, high bondability, fast drying.  Colors are light-stable and UV resistant.  Aqua Resin Stain Finish is based on non-toxic and natural raw materials presenting no harm to the environment or water ways.  The finish is Zero VOC and completely solvent free.

Application Areas: designed for interior or exterior wood surfaces such as windows, doors, wood paneling and other architectural woodwork primarily vertical surfaces.  This is not the best product for flooring as it has no abrasion resistance.

Surface Preparation: Surfaces have to be dry, absorbent and free from flaking and cracking.  Loose coats of paint and old finish have to be removed entirely.  Some previously applied finish coats need to be sanded.  Resinous and oily woods need to be thoroughly cleaned with a solvent before applying Aqua Resin. There are no biocides and will not prevent discoloration of the wood due to fungus.

Application: Aqua Resin Stain Finish has a gel-like consistency and needs to be stirred before use.  Apply by brush, fine roller or sprayer (Airless or Aircoat) at temperatures above 46 degrees farenheight.

Apply one thinned down coat (5-10% of water) for priming, then two coats full strength.  For doors and windows apply three coats full strength.  Light sanding between coats (180-240 grit) is recommended.

Coverage: 120-150 square feet per litre depending on surface porosity and wood type.

Drying Time: Depending upon temperature and moisture, the finished surface should be dry to the touch after 15-30 minutes and may be sanded after one to two hours. Refinish after a minimum of one to two hours drying time.

Thinning and Cleanup: A maximum of 5-10% water may be added for thinning; clean tools with warm water and soap.

Shelf Life: Keep wwell sealed in a dry cool environment.  Do not freeze.  Shelf life one year.

Ingredients: Water, earth pigments, silica, alcohol ester, surfactant, preservative.

Important hint: As a general rule, all exterior surfaces should be inspected once a year and potentially damaged areas must be repaired.

If disposal is necessary: Do not pour unused product down the drain; allow it to dry and dispose of excess material safely and ecologically useing appropriate containers. Please comply with regional regulations.