|
|
ChemLink, DuraLink Super Adhesion Sealant
| Colors: | |  |
Super-adhesion sealant to stick almost anything
DuraLink is an extremely elastic, moisture-cured sealant designed for use in metal architecture where joints are subject to movement. It resists dirt pickup and does not shrink or crack. DuraLink comes in 12 colors, is paintable and can be applied at low temperatures.
DuraLink bonds with almost anything, including: acrylic, epoxy, galvanized steel, anodized aluminum, copper, vinyl siding and windows, wood, polystyrene foam, fiberglass panels, damp masonry and even Kynar (a special paint used on windows).
Please note there is a 2-tube minimum.
Why we like it
DuraLink is super sticky. When everything else fails, it performs well, and for a very long time without falling apart.
Features & benefits
- Weather-tight seal — designed for joints that expand and contract
- Quick-setting — tack-free and rain-ready in 30 minutes
- Non-toxic — solvent free, no formaldehyde or hazardous substances
- Odor-free — pleasant to use; odorless when cured
- Eco-friendly — low VOC
- Versatile — applies vertically and overhead; interior or exterior use
- Easy-to-use — water cleanup; paintable in 24 hours
- Designer friendly — available in 12 colors
Alert: Specs
| Basics |
|---|
| Interior or Exterior | Interior, Exterior |
| Use On Material | parapets, plastic, pvc, sealing - all weather, siding, windows, wood, surfaces - all, block, concrete - pre-cast, cove joints, curtain walls, damp surfaces, door frames, expansion joints, fiberglass frp, metal - galvanized, glass, insulation - EPS foam, kynar - coated metal (500 PVDF), masonry, metal - aluminum |
| Use On | |
| Location | all rooms |
| Eco-replacement for | roofing sealers, sealers - waterproofing, caulk or caulking compound |
| Chemically-sensitive safe | Yes learn one way to test a non-toxic product for tolerance |
| Test before use | Yes, test on inconspicuous area |
| Dimensions |
|---|
| Coverage | 10.1-Ounce = 25 linear feet
28-Ounce = 75 linear feet
5-Gallon = 1,600 linear feet - based on 1/4" bead |
| Square Feet / Box | Square Feet |
| Boxes / Pallet | Boxes |
| Square Feet / Pallet | Square Feet |
| Boards / Box | Boards |
| Pieces / Box | Pieces |
| Weight / Box | Pounds |
| Thickness or Height | " |
| Thickness | mm |
| Veneer Cut Thickness | |
| Length | " |
| Length | mm |
| Width | " |
| Width | mm |
| Features |
|---|
| Minimum Order | |
| Old Name | |
| Origin | |
| Recycled Content | |
| Shelf Life | |
| Use With These Prodcuts | |
| Number of Colors | Colors |
| Carpet Pattern | |
| Coordinating Border | |
| Critical Radiant Flux | |
| Extractable Matter | |
| Face or Pile Weight | |
| Fiber | |
| General Flammability | |
| Surface Flammability | |
| GSA Classification | |
| Line | |
| Machine Guage | |
| Moth Resistance | |
| Pattern Repeat | |
| Pile Height (High) | |
| Pile Height (Low) | |
| Primary Backing | |
| Resistance to Insect Pests | |
| Roll Length | ' |
| Secondary Backing | |
| Smoke Density | |
| Static | |
| Stitches Per Inch | |
| Surface Texture, Construction, Style | |
| Total Height | |
| Total Weight | |
| Traffic Rating | |
| Tufts per Sq. In. | Tufts / Sq In |
| Yarn Construction | |
| Bundles per Pallet | Bundles |
| Bundles per Square 6" Exposure | Bundles |
| Bundles per Square 7" Exposure | Bundles |
| Bundles per Square 7-1/2" Exposure | Bundles |
| Bundles per Square 8" Exposure | Bundles |
| Pounds per Bundle | Pounds |
| Pounds per Pallet | Pounds |
| Pounds per Roll | Pounds |
| Pounds per Square | Pounds |
| Pounds per Square 6" Exposure | Pounds |
| Pounds per Square 7" Exposure | Pounds |
| Pounds per Square 7-1/2" Exposure | Pounds |
| Pounds per Square 8" Exposure | Pounds |
| Lin Feet per Bundle | Lin Feet |
| Lin Feet per Pallet | Lin Feet |
| Rolls per Pallet | Rolls |
| Squares per Roll | Squares |
| Tiles per bundle | Tiles |
| Tiles per Lin Foot | Tiles |
| Finish Type | |
| Base | Water-based |
| Ingredients | download Material Safety Data Sheet (MSDS) |
| VOC Content | < 19 grams/liter Grams/Liter |
| Use On Material - Condition | parapets, plastic, pvc, sealing - all weather, siding, windows, wood, surfaces - all, block, concrete - pre-cast, cove joints, curtain walls, damp surfaces, door frames, expansion joints, fiberglass frp, metal - galvanized, glass, insulation - EPS foam, kynar - coated metal (500 PVDF), masonry, metal - aluminum |
| Use On Instructions | |
| Application Method | caulk gun, see manufacturers guidelines for each type of surface |
| Application Temperature Range | warmer than 30 ° f |
| Application Instructions | see pdf |
| Surface or Product Preperation | Surface should be clean, dry and free from all contamination including: dirt, oils, grease, tar, wax, rust and any other substance that may
inhibit the sealants performance. DO NOT use petroleum solvents such as mineral spirits or xylene to clean your surface before using this product. Instead, remove all dirt, oil, loose paint, frost and other contaminates with alcohol. Horizontal applications will require tooling. Allow treated wood to cure for six months prior to application. Do not use in areas subject to continuous immersion of water or chemicals. Do not use on TPO without Chemlink TPO Primer. |
| Recommended # of Coats | 1 |
| Re-coat After | as needed |
| Drying Time | 30 minute skin over and paintable in 24 hours |
| Appearance When Dry | 12 colors |
| Cleans Up With | alcohol |
| Storage | Store in cool dry place out of sunlight |
| Recycling or Disposal | dispose of excess product in accordance with all local, state and federal regulations., do not through out containers unless completely empty. spread out contents onto dry cardboard or newspaper and thoroughly dry outdoors. you may also absorb with cat litter, sand or other dry material |
| Adhesive | |
| Bamboo Construction | |
| Bathroom Installation | |
| Color Change | |
| Construction | |
| Construction Description | |
| Durability | |
| Edge | |
| Finish | |
| Finish Sheen | |
| Floor Item Type | |
| Floor Pattern | |
| Floor Type | |
| Grade Installation | |
| Grading | |
| Installation | |
| Janka Hardness Rating | |
| Joint System | |
| Knots | |
| Material | |
| Number of Plys | -Plys |
| Composition | |
| Radiant Heat | |
| Range of Resistance | |
| Risk in Dry Climates | |
| Style | |
| Shade (1 Light) - (7 Dark) | |
| Strips / Plank | -Strips/Plank |
| Surface Texture | |
| Surface Treatment | |
| Surface Treatment Color | |
| Tile Application | |
| Touch Up Kit | |
| Can be indoor? | |
| Can be outdoor? | |
| Direct Vent? | |
| Easy-Linkable? | |
| Energy Factor | |
| Max Gallons Per Minute | - GPM |
| Max BTU's / Hour | - BTU's / Hour |
| Multi Control Capabilities | |
| Temperature Range (with remote) | |
| Warranty |
|---|
| Warranties | |
| Residential Finish Wear | |
| Residential Structural | |
| Commercial Finish Wear | |
| Commercial Structural | |
| Certifications |
|---|
| Forest Stewardship Council (FSC) | |
| FSC Content | |
| FSC Chain-of-Custody # | |
| LEED® Qualifications | Indoor Environmental Quality - 4.1 Low-Emitting Materials - Adhesives and Sealants - 1 point |
| LEED® Regional Materials Zip Code | |
| Certifications | Meets or exceeds USDA requirements for non-food contact, Meets or exceeds California Air Resources Board (CARB) requirements, Meets or exceeds California Bay Area Air Quality Management District (BAAQMD) requirements, Meets or exceeds California South Coast Air Quality Management District (SCAQMD) requirements, Meets or exceeds Californial Proposition 65 requirements, Meets or exceeds OTC requirements for sealants & caulks |
Accessories
ChemLink, DuraLink Super Adhesion Sealant
| | Items | Options | Price |
|
Highly versatile super-adhesion sealant caulk that is odorless, flexible and durable |
|
|
|
|
|
ChemLink, DuraLink Super Adhesion Sealant
Item #3318
Was | |
Discount | |
Lifetime Phone Support | FREE |
Shipping | FREE* | |
|
|
|
|
Calculate
Shipping
