|
|
Velvit Products, Velvit Oil Cabin & Deck Finish
| Colors: | |  |
Low VOC exterior penetrating stain sealer
Velvit Oil Cabin & Deck Finish is a semi-transparent deep-penetrating oil and resin finish that repels water, reduces warping and cracking, deters mold growth, and maintains the natural beauty of any wood outdoors. It's wonderful to work with because it's easy to apply; plus you can pick up where you last left off without any difference in appearance.
This finish is made with vegetable oils and low VOC solvents. Please note that this is the only product on the Green Building Supply website that contains any solvents. We carry it because nothing else penetrates into the wood as good as Velvit Oil. This is the key to its long-lasting performance.
NOTE: please order small 4 oz. samples to test for color and sensitivity.
Why we like it
We've tested this on our home for 10 years. It outlasts and outperforms most water-based sealers while still letting the beauty of the wood come through. We've yet to find anything better. One saturating coat will last 5-7 years on north and east sides. May need recoating on south and west in 2-4 years, depending on color of stain and intensity of sun. Darker colors resist UV the best.
While this product does have a slight odor during application, it fades within days. Not for indoor use.
Features & benefits
- Easy-to-use — apply with a brush, roller or rag; use two coats, wet on wet
- Multiple uses — exterior siding, logs, decks, lawn furniture, fences, trim, etc.
- Low odor, safe — VOC-compliant, lead free; no odor once cured
- Quick-drying — dries in 16 to 24 hours under most dry conditions with low humidity
- Protective — deep penetration of oil repels water, weather, wear and tear
- 12 colors + clear — semi-transparent; becomes darker with extra coats
Alert: For outdoor use only. Contains solvents, but dries very quickly within days. Please test before using. CLEAN UP: Use mineral spirits, paint thinner, or brush cleaner. Try our Bioshield Citrus Thinner.
MAINTENANCE: To maintain finish and protection, apply as needed when weathering appears. On some new wood, excess moisture from inside the wood may be released over one or two year period, thus the wood will accept penetration of Velvit Cabin & Deck Finish. In this case, reapply CDF when porosity or weathering is evident. The coat system will give you adequate protection for many years. This will depend on climate, type and condition of wood.
DIRECTIONS: Apply VELVIT CABIN & DECK FINISH to a clean unpainted and unsealed surface. Allow wood to dry 2 or 3 days after it rains. Morning dew should be allowed to dry off a few hours before application, usually after 10:00 am. TEMPERATURE should be between 50 and 90 degrees. Apply in the shade, mix pigment thoroughly, stir often during application.
HANDLING PRECAUTIONS: WARNING: FLAMMABLE LIQUID - HARMFUL OR FATAL IF SWALLOWED - Contains a small amount of petroleum distillates with very low odor. Keep away from heat, sparks and open flame. Use only with adequate ventilation. Avoid prolonged or repeated contact with skin. Keep closure tight and upright to prevent leakage. Keep container closed when not in use. In case of spillage, absorb and dispose of in accordance with local applicable regulations.
FIRST AID: In case of skin contact, flush with plenty of water; for eyes, flush with plenty of water for 15 minutes and get medical attention. If exposed to high concentration of vapor, remove to fresh air. If swallowed, CALL A PHYSICIAN IMMEDIATELY. DO NOT induce vomiting.
KEEP OUT OF THE REACH OF CHILDREN Specs
| Basics |
|---|
| Interior or Exterior | Exterior |
| Use On Material | wood - new, wood - resanded, doors, door frames, windows, wood - decks |
| Use On | |
| Location | cabins, commercial buildings, deck & patio, Fence, garage, hot tub (sauna, whirlpool, bath tub), outhouse |
| Eco-replacement for | stains |
| Chemically-sensitive safe | No learn how to test a non-toxic product for tolerance |
| Test before use | Yes, test on inconspicuous area |
| Dimensions |
|---|
| Coverage | 8-Ounce = 16-19 SF - first coat
8-Ounce = 19-22 SF - second coat
1-Gallon = 250-300 SF - first coat
1-Gallon = 300-350 SF - second coat
5-Gallon = 1,250-1,500 SF - first coat
5-Gallon = 1,500-1,750 SF - second coat |
| Square Feet / Box | Square Feet |
| Boxes / Pallet | Boxes |
| Square Feet / Pallet | Square Feet |
| Boards / Box | Boards |
| Pieces / Box | Pieces |
| Weight / Box | Pounds |
| Thickness or Height | " |
| Thickness | mm |
| Veneer Cut Thickness | |
| Length | " |
| Length | mm |
| Width | " |
| Width | mm |
| Features |
|---|
| Minimum Order | |
| Old Name | |
| Origin | |
| Recycled Content | |
| Shelf Life | |
| Use With These Prodcuts | |
| Number of Colors | Colors |
| Carpet Pattern | |
| Coordinating Border | |
| Critical Radiant Flux | |
| Extractable Matter | |
| Face or Pile Weight | |
| Fiber | |
| General Flammability | |
| Surface Flammability | |
| GSA Classification | |
| Line | |
| Machine Guage | |
| Moth Resistance | |
| Pattern Repeat | |
| Pile Height (High) | |
| Pile Height (Low) | |
| Primary Backing | |
| Resistance to Insect Pests | |
| Roll Length | ' |
| Secondary Backing | |
| Smoke Density | |
| Static | |
| Stitches Per Inch | |
| Surface Texture, Construction, Style | |
| Total Height | |
| Total Weight | |
| Traffic Rating | |
| Tufts per Sq. In. | Tufts / Sq In |
| Yarn Construction | |
| Bundles per Pallet | Bundles |
| Bundles per Square 6" Exposure | Bundles |
| Bundles per Square 7" Exposure | Bundles |
| Bundles per Square 7-1/2" Exposure | Bundles |
| Bundles per Square 8" Exposure | Bundles |
| Pounds per Bundle | Pounds |
| Pounds per Pallet | Pounds |
| Pounds per Roll | Pounds |
| Pounds per Square | Pounds |
| Pounds per Square 6" Exposure | Pounds |
| Pounds per Square 7" Exposure | Pounds |
| Pounds per Square 7-1/2" Exposure | Pounds |
| Pounds per Square 8" Exposure | Pounds |
| Lin Feet per Bundle | Lin Feet |
| Lin Feet per Pallet | Lin Feet |
| Rolls per Pallet | Rolls |
| Squares per Roll | Squares |
| Tiles per bundle | Tiles |
| Tiles per Lin Foot | Tiles |
| Finish Type | |
| Base | Oil-based |
| Ingredients | download Material Safety Data Sheet (MSDS) |
| VOC Content | 530 grams/liter Grams/Liter |
| Use On Material - Condition | wood - new, wood - resanded, doors, door frames, windows, wood - decks |
| Use On Instructions | |
| Application Method | brush, paint pad, spray |
| Application Temperature Range | warmer than 55 ° f |
| Application Instructions | see pdf |
| Surface or Product Preperation | Surface should be clean, dry and free of oil |
| Recommended # of Coats | 2 coats (ie. one coat followed by another within 15 minutes) |
| Re-coat After | as needed |
| Drying Time | 2-4 hours |
| Appearance When Dry | matte |
| Cleans Up With | Bioshield Citrus Thinner, AFM Safecoat Naturals Diluent Reducer, mineral spirits |
| Storage | Store in cool dry place out of sunlight |
| Recycling or Disposal | dispose of excess product in accordance with all local, state and federal regulations., disposal of oil can be by painting or rolling out oil onto sheets of carboard and dried outdoors. or fill the remains of a container with absorbant materials such as sand or cat litter. |
| Adhesive | |
| Bamboo Construction | |
| Bathroom Installation | |
| Color Change | |
| Construction | |
| Construction Description | |
| Durability | |
| Edge | |
| Finish | |
| Finish Sheen | |
| Floor Item Type | |
| Floor Pattern | |
| Floor Type | |
| Grade Installation | |
| Grading | |
| Installation | |
| Janka Hardness Rating | |
| Joint System | |
| Knots | |
| Material | |
| Number of Plys | -Plys |
| Composition | |
| Radiant Heat | |
| Range of Resistance | |
| Risk in Dry Climates | |
| Style | |
| Shade (1 Light) - (7 Dark) | |
| Strips / Plank | -Strips/Plank |
| Surface Texture | |
| Surface Treatment | |
| Surface Treatment Color | |
| Tile Application | |
| Touch Up Kit | |
| Can be indoor? | |
| Can be outdoor? | |
| Direct Vent? | |
| Easy-Linkable? | |
| Energy Factor | |
| Max Gallons Per Minute | - GPM |
| Max BTU's / Hour | - BTU's / Hour |
| Multi Control Capabilities | |
| Temperature Range (with remote) | |
| Warranty |
|---|
| Warranties | |
| Residential Finish Wear | |
| Residential Structural | |
| Commercial Finish Wear | |
| Commercial Structural | |
| Certifications |
|---|
| Forest Stewardship Council (FSC) | |
| FSC Content | |
| FSC Chain-of-Custody # | |
| LEED® Qualifications | |
| LEED® Regional Materials Zip Code | |
| Certifications | |
CDF (Cabin and Deck Finish) exterior oil when applied full strength gives long lasting protection against cracking and mildew. Interior Oil is lead free both in its natural state and with tints. In a liquid state it does contain petroleum distillates. After it has cured, no toxic residues remain
Accessories
Velvit Products, Velvit Oil Cabin & Deck Finish
| | Items | Options | Price |
|
Low VOC, oil-based, penetrating sealer for all wood exteriors in 8 colors with a very long-lasting finish |
|
|
|
|
|
Velvit Products, Velvit Oil Cabin & Deck Finish
Item #3271
Was | |
Discount | |
Lifetime Phone Support | FREE |
Shipping | FREE* |
Your Price | $9.95 – $325.00 |
|
|
|
|
|
|
Calculate
Shipping
