|
|
Bioshield, Resin Floor Finish
| Colors: | |  |
All-natural, clear, Gloss or Semi-gloss floor finish
Bioshield Resin Floor Finish is an oil-based finish intended to be installed after priming the surface with Bioshield Primer Oil or Bioshield Penetrating Oil Sealer.
It's suitable for use on all types of floors including hardwood, softwood, adobe, stone, terra cotta, brick and cork. Bioshield Resin Floor Finish results in a breathable and elastic finish that adds depth and dimension to any floor.
Why we like it
This is a simple, easy-to-use product that seals well on all types of wood if applied after Bioshield Primer Oil or Bioshield Penetrating Oil Sealer. Unlike other oil finishes, it leaves a glossy or semi-glossy sheen with no buffing.
Features & benefits
- Penetrating oil finish — seals from the inside, yet leaves a glossy finish
- Easy application — brush on; do not thin or spray
- All-natural ingredients — linseed oil, soy alkyd resin, colophony, isoaliphatics, lead-free driers, silica and oximes
- Non-toxic, low-odor — free from phosphates, lead, synthetic fragrance or preservatives
- Safe — for everyone, including the chemically sensitive. learn how to test a non-toxic product for tolerance
Alert: Use:Two to three coats of this product are recommended. Application is by brush. The surface should be absorbent, and free of dust, grease, wax, oil, nicotine and other contaminants. Wood surfaces should be primed with one to two coats of BioShield Oil Primer #1. Highly absorbent wood floors, adobe, terra cotta tile, and cork should be primed with one to two coats of #5 Penetrating Oil Sealer. As a general guide, you can plan on two coats of this product for new floors and one for recoat situations. Highly absorbent surfaces such as adobe or cork will perform best with three coats.
Specs
| Basics |
|---|
| Interior or Exterior | Interior |
| Use On Material | cork, hardwood, stone, brick, terra-cotta, wood - softwood, cork - flooring, surfaces - porous, concrete, stucco, block, stone - unsealed, stone - porous, masonry - unsealed, masonry - porous, tile - unglazed, wood, adobe |
| Use On | Use on floors of all types. |
| Location | all rooms |
| Eco-replacement for | sealers |
| Chemically-sensitive safe | Yes learn how to test a non-toxic product for tolerance |
| Test before use | Yes, test on inconspicuous area |
| Dimensions |
|---|
| Coverage | 3.4-Ounce = 12-16 SF
25-Ounce = 90-120 SF
85-Ounce = 300-400 SF |
| Square Feet / Box | Square Feet |
| Boxes / Pallet | Boxes |
| Square Feet / Pallet | Square Feet |
| Boards / Box | Boards |
| Pieces / Box | Pieces |
| Weight / Box | Pounds |
| Thickness or Height | " |
| Thickness | mm |
| Veneer Cut Thickness | |
| Length | " |
| Length | mm |
| Width | " |
| Width | mm |
| Features |
|---|
| Minimum Order | |
| Old Name | |
| Origin | |
| Recycled Content | |
| Shelf Life | |
| Use With These Prodcuts | Bioshield Primer Oil | Bioshield Penetrating Oil | Bioshield Hard Oil |
| Number of Colors | Colors |
| Carpet Pattern | |
| Coordinating Border | |
| Critical Radiant Flux | |
| Extractable Matter | |
| Face or Pile Weight | |
| Fiber | |
| General Flammability | |
| Surface Flammability | |
| GSA Classification | |
| Line | |
| Machine Guage | |
| Moth Resistance | |
| Pattern Repeat | |
| Pile Height (High) | |
| Pile Height (Low) | |
| Primary Backing | |
| Resistance to Insect Pests | |
| Roll Length | ' |
| Secondary Backing | |
| Smoke Density | |
| Static | |
| Stitches Per Inch | |
| Surface Texture, Construction, Style | |
| Total Height | |
| Total Weight | |
| Traffic Rating | |
| Tufts per Sq. In. | Tufts / Sq In |
| Yarn Construction | |
| Bundles per Pallet | Bundles |
| Bundles per Square 6" Exposure | Bundles |
| Bundles per Square 7" Exposure | Bundles |
| Bundles per Square 7-1/2" Exposure | Bundles |
| Bundles per Square 8" Exposure | Bundles |
| Pounds per Bundle | Pounds |
| Pounds per Pallet | Pounds |
| Pounds per Roll | Pounds |
| Pounds per Square | Pounds |
| Pounds per Square 6" Exposure | Pounds |
| Pounds per Square 7" Exposure | Pounds |
| Pounds per Square 7-1/2" Exposure | Pounds |
| Pounds per Square 8" Exposure | Pounds |
| Lin Feet per Bundle | Lin Feet |
| Lin Feet per Pallet | Lin Feet |
| Rolls per Pallet | Rolls |
| Squares per Roll | Squares |
| Tiles per bundle | Tiles |
| Tiles per Lin Foot | Tiles |
| Finish Type | |
| Base | Water-based |
| Ingredients | isoaliphatics, lead-free dryers (zircon octoat, cobalt octoat), oil - linseed, oximes (anti-skinning agent), resin - colophonium (pine), resin - soy alkyd, silica |
| VOC Content | <50 grams/liter Grams/Liter |
| Use On Material - Condition | cork, hardwood, stone, brick, terra-cotta, wood - softwood, cork - flooring, surfaces - porous, concrete, stucco, block, stone - unsealed, stone - porous, masonry - unsealed, masonry - porous, tile - unglazed, wood, adobe |
| Use On Instructions | Use on floors of all types. |
| Application Method | brush, do not spray, do not thin |
| Application Temperature Range | warmer than 55 ° f |
| Application Instructions | Brush on and work into surface |
| Surface or Product Preperation | Surface should be sound, dust free, and free of contaminants such as mildew, oil, and grease. The maximum moisture content for softwoods should not exceed 18 percent, and hardwoods should not exceed 12 percent moisture. Very resinous woods such as teak should be cleaned with BioShield Healthy Living Citrus Thinner, and other exotic woods should be wiped with an alcohol thinner (ethanol) |
| Recommended # of Coats | 2 or 3 as needed |
| Re-coat After | as needed |
| Drying Time | 24 hours between coats, cures in several days |
| Appearance When Dry | slightly amber gloss |
| Cleans Up With | Bioshield Citrus Thinner |
| Storage | Store in cool dry place out of sunlight |
| Recycling or Disposal | dispose of excess product in accordance with all local, state and federal regulations., disposal of oil can be by painting or rolling out oil onto sheets of carboard and dried outdoors. or fill the remains of a container with absorbant materials such as sand or cat litter. |
| Adhesive | |
| Bamboo Construction | |
| Bathroom Installation | |
| Color Change | |
| Construction | |
| Construction Description | |
| Durability | |
| Edge | |
| Finish | |
| Finish Sheen | |
| Floor Item Type | |
| Floor Pattern | |
| Floor Type | |
| Grade Installation | |
| Grading | |
| Installation | |
| Janka Hardness Rating | |
| Joint System | |
| Knots | |
| Material | |
| Number of Plys | -Plys |
| Composition | |
| Radiant Heat | |
| Range of Resistance | |
| Risk in Dry Climates | |
| Style | |
| Shade (1 Light) - (7 Dark) | |
| Strips / Plank | -Strips/Plank |
| Surface Texture | |
| Surface Treatment | |
| Surface Treatment Color | |
| Tile Application | |
| Touch Up Kit | |
| Can be indoor? | |
| Can be outdoor? | |
| Direct Vent? | |
| Easy-Linkable? | |
| Energy Factor | |
| Max Gallons Per Minute | - GPM |
| Max BTU's / Hour | - BTU's / Hour |
| Multi Control Capabilities | |
| Temperature Range (with remote) | |
| Warranty |
|---|
| Warranties | |
| Residential Finish Wear | |
| Residential Structural | |
| Commercial Finish Wear | |
| Commercial Structural | |
| Certifications |
|---|
| Forest Stewardship Council (FSC) | |
| FSC Content | |
| FSC Chain-of-Custody # | |
| LEED® Qualifications | |
| LEED® Regional Materials Zip Code | |
| Certifications | |
|
Bioshield, Resin Floor Finish
Item #19028
Was | |
Discount | |
Lifetime Phone Support | FREE |
Shipping | FREE* | |
|
|
|
|
Calculate
Shipping
