|
|
ChemLink, FloorSecure
| Colors: | |  |
Solvent-free, odorless flooring adhesive
FloorSecure provides a safe, high-quality alternative to toxic flooring adhesives. This unique isocyanate-free formula offers easy installation even in difficult, wet or cold environments. It can also be used in occupied buildings like schools and hospitals where harsh odors and toxicity are of concern.
Why we like it
This product is ideal for occupied buildings and difficult conditions. It's very strong and bonds to just about anything.
Features & benefits
- 100% solids — won't shrink
- Non-toxic — no solvents, unlike most adhesives
- Safe — for everyone, including the chemically sensitive. learn how to test a non-toxic product for tolerance
- Superior quality — good adhesion in wet and cold; no shrinkage means maximum coverage
- Supports safe indoor air quality — odorless
- Eco-friendly — very low VOC
- Fast-drying — 20-30 minute working time; accommodates light foot traffic in two-four hours
- Easy-to-use — applies and spreads quickly and smoothly
Alert: DO NOT use petroleum solvents such as mineral spirits or xylene to clean your surface before using this product. Instead, remove all dirt, oil, loose paint, frost and other contaminates with alcohol.
Specs
| Basics |
| Interior or Exterior | Interior, Exterior |
| Use On Material | surfaces - porous, cement board, damp surfaces, wood - Oriented Strand Board (OSB), subfloors, tile, wood, wood - plywood, surfaces - hard |
| Use On | |
| Location | all rooms |
| Eco-replacement for | caulk or caulking compound, roofing sealers, sealers - waterproofing |
| Chemically-sensitive safe | Yes learn how to test a non-toxic product for tolerance |
| Test before use | Yes, test on inconspicuous area |
| Dimensions |
| Coverage | 1-Gallon
35 SF - with 1/4" x 1/4" x 1/4" square notch trowel
40 SF - with 1/4" x 1/4" x 1/8" square notch trowel
80 SF - with 1/8" x 1/8" x 1/8" square notch trowel
50 SF - with 3/16" x 5/32" V notch trowel
2-Gallon
70 SF - with 1/4" x 1/4" x 1/4" square notch trowel
80 SF - with 1/4" x 1/4" x 1/8" square notch trowel
160 SF - with 1/8" x 1/8" x 1/8" square notch trowel
100 SF - with 3/16" x 5/32" V notch trowel
3.5-Gallon
123 SF - with 1/4" x 1/4" x 1/4" square notch trowel
140 SF - with 1/4" x 1/4" x 1/8" square notch trowel
804 SF - with 1/8" x 1/8" x 1/8" square notch trowel
175 SF - with 3/16" x 5/32" V notch trowel
5-Gallon
175 SF - with 1/4" x 1/4" x 1/4" square notch trowel
200 SF - with 1/4" x 1/4" x 1/8" square notch trowel
400 SF - with 1/8" x 1/8" x 1/8" square notch trowel
250 SF - with 3/16" x 5/32" V notch trowel |
| Square Feet / Box | Square Feet |
| Boxes / Pallet | Boxes |
| Square Feet / Pallet | Square Feet |
| Boards / Box | Boards |
| Pieces / Box | Pieces |
| Weight / Box | Pounds |
| Thickness or Height | " |
| Thickness | mm |
| Veneer Cut Thickness | |
| Length | " |
| Length | mm |
| Width | " |
| Width | mm |
| Features |
| Minimum Order | |
| Old Name | |
| Origin | |
| Recycled Content | |
| Shelf Life | |
| Use With These Prodcuts | |
| Number of Colors | Colors |
| Carpet Pattern | |
| Coordinating Border | |
| Critical Radiant Flux | |
| Extractable Matter | |
| Face or Pile Weight | |
| Fiber | |
| General Flammability | |
| Surface Flammability | |
| GSA Classification | |
| Line | |
| Machine Guage | |
| Moth Resistance | |
| Pattern Repeat | |
| Pile Height (High) | |
| Pile Height (Low) | |
| Primary Backing | |
| Resistance to Insect Pests | |
| Roll Length | ' |
| Secondary Backing | |
| Smoke Density | |
| Static | |
| Stitches Per Inch | |
| Surface Texture, Construction, Style | |
| Total Height | |
| Total Weight | |
| Traffic Rating | |
| Tufts per Sq. In. | Tufts / Sq In |
| Yarn Construction | |
| Bundles per Pallet | Bundles |
| Bundles per Square 6" Exposure | Bundles |
| Bundles per Square 7" Exposure | Bundles |
| Bundles per Square 7-1/2" Exposure | Bundles |
| Bundles per Square 8" Exposure | Bundles |
| Pounds per Bundle | Pounds |
| Pounds per Pallet | Pounds |
| Pounds per Roll | Pounds |
| Pounds per Square | Pounds |
| Pounds per Square 6" Exposure | Pounds |
| Pounds per Square 7" Exposure | Pounds |
| Pounds per Square 7-1/2" Exposure | Pounds |
| Pounds per Square 8" Exposure | Pounds |
| Lin Feet per Bundle | Lin Feet |
| Lin Feet per Pallet | Lin Feet |
| Rolls per Pallet | Rolls |
| Squares per Roll | Squares |
| Tiles per bundle | Tiles |
| Tiles per Lin Foot | Tiles |
| Finish Type | |
| Base | Polyether |
| Ingredients | download Material Safety Data Sheet (MSDS) |
| VOC Content | < 32 grams/liter Grams/Liter |
| Use On Material - Condition | surfaces - porous, cement board, damp surfaces, wood - Oriented Strand Board (OSB), subfloors, tile, wood, wood - plywood, surfaces - hard |
| Use On Instructions | |
| Application Method | see flooring manufacturers guidelines., trowel |
| Application Temperature Range | warmer than 30 ° f |
| Application Instructions | see pdf |
| Surface or Product Preperation | Surface should be clean, dry and free from all contamination including: dirt, oils, grease, tar, wax, rust and any other substance that may
inhibit the sealants performance. DO NOT use petroleum solvents such as mineral spirits or xylene to clean your surface before using this product. Instead, remove all dirt, oil, loose paint, frost and other contaminates with alcohol. Horizontal applications will require tooling. Allow treated wood to cure for six months prior to application. Do not use in areas subject to continuous immersion of water or chemicals. Do not use on TPO without Chemlink TPO Primer. |
| Recommended # of Coats | 1 |
| Re-coat After | |
| Drying Time | 40 minute skin time |
| Appearance When Dry | black gloss |
| Cleans Up With | alcohol |
| Storage | Store in cool dry place out of sunlight |
| Recycling or Disposal | dispose of excess product in accordance with all local, state and federal regulations., do not through out containers unless completely empty. spread out contents onto dry cardboard or newspaper and thoroughly dry outdoors. you may also absorb with cat litter, sand or other dry material |
| Adhesive | |
| Bamboo Construction | |
| Bathroom Installation | |
| Color Change | |
| Construction | |
| Construction Description | |
| Durability | |
| Edge | |
| Finish | |
| Finish Sheen | |
| Floor Item Type | |
| Floor Pattern | |
| Floor Type | |
| Grade Installation | |
| Grading | |
| Installation | |
| Janka Hardness Rating | |
| Joint System | |
| Knots | |
| Material | |
| Number of Plys | -Plys |
| Composition | |
| Radiant Heat | |
| Range of Resistance | |
| Risk in Dry Climates | |
| Style | |
| Shade (1 Light) - (7 Dark) | |
| Strips / Plank | -Strips/Plank |
| Surface Texture | |
| Surface Treatment | |
| Surface Treatment Color | |
| Tile Application | |
| Touch Up Kit | |
| Can be indoor? | |
| Can be outdoor? | |
| Direct Vent? | |
| Easy-Linkable? | |
| Energy Factor | |
| Max Gallons Per Minute | - GPM |
| Max BTU's / Hour | - BTU's / Hour |
| Multi Control Capabilities | |
| Temperature Range (with remote) | |
| Warranty |
| Warranties | |
| Residential Finish Wear | |
| Residential Structural | |
| Commercial Finish Wear | |
| Commercial Structural | |
| Certifications |
| Forest Stewardship Council (FSC) | |
| FSC Content | |
| FSC Chain-of-Custody # | |
| LEED® Qualifications | |
| LEED® Regional Materials Zip Code | |
| Certifications | Meets or exceeds California Air Resources Board (CARB) requirements, Meets or exceeds California Bay Area Air Quality Management District (BAAQMD) requirements, Meets or exceeds California South Coast Air Quality Management District (SCAQMD) requirements, Meets or exceeds Californial Proposition 65 requirements, Meets or exceeds OTC requirements for sealants & caulks, Meets or exceeds USDA requirements for non-food contact |
Accessories
ChemLink, FloorSecure
| | Items | Options | Price |
|
Solvent-free, non-toxic, ultra low-odor adhesive for wood, tile and resilient flooring |
|
|
|
|
|
ChemLink, FloorSecure
Item #4567
Was | |
Discount | |
Lifetime Phone Support | FREE |
Shipping | FREE* |
Your Price | $77.44 $186.90 |
|
|
|
|
|
|