|
|
ChemLink, Clear Polyether Sealant, 10.1-Ounce
| Colors: | |  |
Better than silicone
Clear is a non-toxic, ultra-low odor, elastomeric caulk and sealant for indoor or outdoor use that outperforms most urethanes and silicones. Clear is moisture-cured, making it perfect for tough job-site conditions that are very dry or damp; it's also good in cold climates as it can be applied at temperatures as low as 30 °F. Use on wood, metal, glass, EIFS, EPS foam, concrete and stone.
It works well in joints that expand or contract more than 25%. Unlike most silicones, CLEAR is rain-ready within 20 minutes, compared to 1-3 hours, and is paintable within 24 hours.
Why we like it
Applying caulk in cold or damp weather can be a challenge that holds up the whole job. CLEAR is the perfect odor-free multi-purpose product that performs better than some silicones with the advantage of being paintable and rain-ready within 20 minutes.
Features & benefits
- Non-toxic — no formaldehyde, ammonia, crystalline silica, ethylene glycol, exempt solvents, aromatic hydrocarbons or isocyanates
- Works in tough conditions — will cure when damp, dry or cold as low as 30 °F
- Elastomeric — capable of joint compression and expansion without cracking
- 100% solids content — will not shrink
- Non-slumping — applies vertically and overhead
- Safe — for everyone, including the chemically sensitive. learn how to test a non-toxic product for tolerance
- Eco-friendly — ultra low VOC
- No odor — pleasant to use
- Lasting color — does not discolor when exposed to UV lighting
Alert: Do not use with mineral spirits or xylene, do not use in areas subject to continuous immersion and do not store in hot temperatures. Allow treated wood to cure for six months before applying. Contact tech support for areas subject to chemical exposure. Specs
| Basics |
|---|
| Interior or Exterior | Interior, Exterior |
| Use On Material | glass, metal - aluminum, metal - galvanized, palstic - engineered, parapets, pvc, SBS mod bit, sealing - all weather, siding, stone, windows, wood, surfaces - all, temperature - cold, damp surfaces, surfaces - dry, Exterior Insulation Finishing System (EIFS), brick, concrete - block, cove joints, door frames, masonry, expansion joints, fiberglass frp |
| Use On | |
| Location | all rooms |
| Eco-replacement for | caulk or caulking compound |
| Chemically-sensitive safe | Yes learn how to test a non-toxic product for tolerance |
| Test before use | Yes, test on inconspicuous area |
| Dimensions |
|---|
| Coverage | 10.1-Ounce = 25 linear feet
28-Ounce = 75 linear feet - based on 1/4" bead |
| Square Feet / Box | Square Feet |
| Boxes / Pallet | Boxes |
| Square Feet / Pallet | Square Feet |
| Boards / Box | Boards |
| Pieces / Box | Pieces |
| Weight / Box | Pounds |
| Thickness or Height | " |
| Thickness | mm |
| Veneer Cut Thickness | |
| Length | " |
| Length | mm |
| Width | " |
| Width | mm |
| Features |
|---|
| Minimum Order | |
| Old Name | |
| Origin | |
| Recycled Content | |
| Shelf Life | |
| Use With These Prodcuts | |
| Number of Colors | Colors |
| Carpet Pattern | |
| Coordinating Border | |
| Critical Radiant Flux | |
| Extractable Matter | |
| Face or Pile Weight | |
| Fiber | |
| General Flammability | |
| Surface Flammability | |
| GSA Classification | |
| Line | |
| Machine Guage | |
| Moth Resistance | |
| Pattern Repeat | |
| Pile Height (High) | |
| Pile Height (Low) | |
| Primary Backing | |
| Resistance to Insect Pests | |
| Roll Length | ' |
| Secondary Backing | |
| Smoke Density | |
| Static | |
| Stitches Per Inch | |
| Surface Texture, Construction, Style | |
| Total Height | |
| Total Weight | |
| Traffic Rating | |
| Tufts per Sq. In. | Tufts / Sq In |
| Yarn Construction | |
| Bundles per Pallet | Bundles |
| Bundles per Square 6" Exposure | Bundles |
| Bundles per Square 7" Exposure | Bundles |
| Bundles per Square 7-1/2" Exposure | Bundles |
| Bundles per Square 8" Exposure | Bundles |
| Pounds per Bundle | Pounds |
| Pounds per Pallet | Pounds |
| Pounds per Roll | Pounds |
| Pounds per Square | Pounds |
| Pounds per Square 6" Exposure | Pounds |
| Pounds per Square 7" Exposure | Pounds |
| Pounds per Square 7-1/2" Exposure | Pounds |
| Pounds per Square 8" Exposure | Pounds |
| Lin Feet per Bundle | Lin Feet |
| Lin Feet per Pallet | Lin Feet |
| Rolls per Pallet | Rolls |
| Squares per Roll | Squares |
| Tiles per bundle | Tiles |
| Tiles per Lin Foot | Tiles |
| Finish Type | |
| Base | Polyether |
| Ingredients | download Material Safety Data Sheet (MSDS) |
| VOC Content | 14 grams/liter Grams/Liter |
| Use On Material - Condition | glass, metal - aluminum, metal - galvanized, palstic - engineered, parapets, pvc, SBS mod bit, sealing - all weather, siding, stone, windows, wood, surfaces - all, temperature - cold, damp surfaces, surfaces - dry, Exterior Insulation Finishing System (EIFS), brick, concrete - block, cove joints, door frames, masonry, expansion joints, fiberglass frp |
| Use On Instructions | |
| Application Method | caulk gun, see manufacturers guidelines for each type of surface |
| Application Temperature Range | warmer than 30 ° f |
| Application Instructions | see pdf |
| Surface or Product Preperation | Surface should be clean, dry and free from all contamination including: dirt, oils, grease, tar, wax, rust and any other substance that may
inhibit the sealants performance. DO NOT use petroleum solvents such as mineral spirits or xylene to clean your surface before using this product. Instead, remove all dirt, oil, loose paint, frost and other contaminates with alcohol. Horizontal applications will require tooling. Allow treated wood to cure for six months prior to application. Do not use in areas subject to continuous immersion of water or chemicals. Do not use on TPO without Chemlink TPO Primer |
| Recommended # of Coats | 1 |
| Re-coat After | as needed |
| Drying Time | 20 minute skin over and paintable in 24 hours |
| Appearance When Dry | clear satin |
| Cleans Up With | alcohol |
| Storage | Store in cool dry place out of sunlight |
| Recycling or Disposal | do not through out containers unless completely empty. pour our contents onto dry cardboard or newspaper and thoroughly dry outdoors. you may also absorb with cat litter, sand or other dry materials., dispose of excess product in accordance with all local, state and federal regulations. |
| Adhesive | |
| Bamboo Construction | |
| Bathroom Installation | |
| Color Change | |
| Construction | |
| Construction Description | |
| Durability | |
| Edge | |
| Finish | |
| Finish Sheen | |
| Floor Item Type | |
| Floor Pattern | |
| Floor Type | |
| Grade Installation | |
| Grading | |
| Installation | |
| Janka Hardness Rating | |
| Joint System | |
| Knots | |
| Material | |
| Number of Plys | -Plys |
| Composition | |
| Radiant Heat | |
| Range of Resistance | |
| Risk in Dry Climates | |
| Style | |
| Shade (1 Light) - (7 Dark) | |
| Strips / Plank | -Strips/Plank |
| Surface Texture | |
| Surface Treatment | |
| Surface Treatment Color | |
| Tile Application | |
| Touch Up Kit | |
| Can be indoor? | |
| Can be outdoor? | |
| Direct Vent? | |
| Easy-Linkable? | |
| Energy Factor | |
| Max Gallons Per Minute | - GPM |
| Max BTU's / Hour | - BTU's / Hour |
| Multi Control Capabilities | |
| Temperature Range (with remote) | |
| Warranty |
|---|
| Warranties | |
| Residential Finish Wear | |
| Residential Structural | |
| Commercial Finish Wear | |
| Commercial Structural | |
| Certifications |
|---|
| Forest Stewardship Council (FSC) | |
| FSC Content | |
| FSC Chain-of-Custody # | |
| LEED® Qualifications | Indoor Environmental Quality - 4.1 Low-Emitting Materials - Adhesives and Sealants - 1 point |
| LEED® Regional Materials Zip Code | |
| Certifications | American Subcontractors Association (ASA), Associated General Contractors of America (AGC), Building Owners and Maintenance Association (BOMA), Construction Specifications Institute (CSI), Meets or exceeds California Air Resources Board (CARB) requirements, Meets or exceeds California Bay Area Air Quality Management District (BAAQMD) requirements, Meets or exceeds California South Coast Air Quality Management District (SCAQMD) requirements, Meets or exceeds Californial Proposition 65 requirements, Meets or exceeds OTC requirements for sealants & caulks, Meets or exceeds USDA requirements for non-food contact, Metal Building Contractors / Erectors Association (MBCEA), National Association of Home Builders (NAHB), National Roofing Contractors Association (NRCA), Sealant Waterproofing & Restoration Institute (SWRI), Sheet Metal and Air Conditioning National Association (SMACNA), U.S. Green Building Council (USGBC) Member |
Accessories
ChemLink, Clear Polyether Sealant, 10.1-Ounce
| | Items | Options | Price |
|
Elastomeric caulk/sealant that is ultra-low-odor for use indoors and outdoors which outperforms most silicones and urethanes |
|
|
|
|
|
ChemLink, Clear Polyether Sealant, 10.1-Ounce
Item #3326
Was | |
Discount | |
Lifetime Phone Support | FREE |
Shipping | FREE* | |
|
|
|
|
Calculate
Shipping
